- Home
- Model
- YAMAHA 401 - 750cc
- SR500
- Motorcycle Parts
- Engine Parts
- Intake Parts
- Carburetors
- YOSHIMURA
- YOSHIMURA: MIKUNI TMR-MJN40 Carburetor (with TPS)
MIKUNI TMR-MJN40 Carburetor (with TPS)
- Product number: 788-351-2012
-
- IN STOCK
- Out Stock
- YOSHIMURA
- |
- 0.0
- (0 review)
Check my coupons
Product Detail
Specification:
Power Filter Specifications
Intake Diameter:Φ40
Carburetor Pitch :Single Body
Spigot outer diameter (mm):45mm
Spigot length(mm):30mm
[Parts required separately]
Universal Oil Catch Tank Set
Secondary air blind cap (01-)
[Separately required parts for installation]
Either of the following throttle holder sets
Yoshimura Racing Throttle Holder Set for TMR Large Body (L=850mm)
・Yoshimura Racing Throttle Holder Set for TMR Large Body with Switch (L=850mm) (Switch side coupler wiring required to be changed)
Intake Diameter:Φ40
Carburetor Pitch :Single Body
Spigot outer diameter (mm):45mm
Spigot length(mm):30mm
[Parts required separately]
Universal Oil Catch Tank Set
Secondary air blind cap (01-)
[Separately required parts for installation]
Either of the following throttle holder sets
Yoshimura Racing Throttle Holder Set for TMR Large Body (L=850mm)
・Yoshimura Racing Throttle Holder Set for TMR Large Body with Switch (L=850mm) (Switch side coupler wiring required to be changed)
[Description]
This carburetor is compatible with the TPS installed on the SR since '03, which stabilizes the output at low speeds and prevents the meter from malfunctioning.
The TMR-MJN40 carburetor provides better acceleration and torque at low RPM and more power at high RPM compared to the Stock carburetor.
The performance is much better than stock in all ranges.
The TMR-MJN40 carburetor provides better acceleration and torque at low RPM and more power at high RPM compared to the Stock carburetor.
The performance is much better than stock in all ranges.
Note
*Manufacturer Site*
Caution
*There may be changes in product specifications due to the manufacturer's reasons.
*The picture shows SR400 with funnel.
*The filter adapter included with this product is a machined aluminum product.
*The length of the throttle wire is the standard setting.Please note that it may vary depending on the installation method.
*The parts that are required to be installed separately are the parts that YOSHIMIURA Japan has confirmed to be installed during development.
If the manufacturer's stock parts have been discontinued, please prepare the appropriate parts.
*The picture shows SR400 with funnel.
*The filter adapter included with this product is a machined aluminum product.
*The length of the throttle wire is the standard setting.Please note that it may vary depending on the installation method.
*The parts that are required to be installed separately are the parts that YOSHIMIURA Japan has confirmed to be installed during development.
If the manufacturer's stock parts have been discontinued, please prepare the appropriate parts.
Applicable Models
ALSO VIEWED PRODUCTS
Apply Coupon
Image Review
Review detail
/