- Home
- Model
- KAWASAKI 251 - 400cc
- ZRX400
- Motorcycle Parts
- Engine Parts
- Intake Parts
- Carburetors
- YOSHIMURA
- YOSHIMURA: MIKUNI TMR32 Carburetor Set
MIKUNI TMR32 Carburetor Set
- Product number: 785-232-7102
-
- IN STOCK
- Out Stock
- YOSHIMURA
- |
- 0.0
- (0 review)
Check my coupons
Product Detail
Specification:
[Type] Power filter
[Specification]
・Inner diameter: Φ32
Base body:TMR32-D1
Carburetor pitch:77-85-77
Spigot outer diameter (mm):38mm
・Spigot total length(mm):28mm
[Parts required separately]
・Yoshimura Oil Breather Tank Kit
・Fuel cock for GSX-R400R3/4 (SUZUKI stock part number 44300-32B04)
[Specification]
・Inner diameter: Φ32
Base body:TMR32-D1
Carburetor pitch:77-85-77
Spigot outer diameter (mm):38mm
・Spigot total length(mm):28mm
[Parts required separately]
・Yoshimura Oil Breather Tank Kit
・Fuel cock for GSX-R400R3/4 (SUZUKI stock part number 44300-32B04)
Note
* The image is only for reference. The image shown may differ from the actual product.
Caution
*Either of the following throttle holder sets is required as a separate part for installation.
*Yoshimura Racing Throttle Holder Set for TMR Small Body (L=850mm)
*Yoshimura Racing Throttle Holder Set for TMR Small Body with Switch (L=850mm) (Switch side coupler wiring required to be changed)
*Parts required separately:YOSHIMIURA Oil Breather Tank Kit.
*Required parts are the parts that YOSHIMIURA Japan confirmed the installation during the development.
*Please prepare the appropriate parts if stock parts have been discontinued.
*The length of the throttle wire is the standard setting.Please note that it may vary depending on the installation method.
*The filter adapter included with this product is a machined aluminum product.
*There may be changes in product specifications due to the manufacturer's reasons.
*Yoshimura Racing Throttle Holder Set for TMR Small Body (L=850mm)
*Yoshimura Racing Throttle Holder Set for TMR Small Body with Switch (L=850mm) (Switch side coupler wiring required to be changed)
*Parts required separately:YOSHIMIURA Oil Breather Tank Kit.
*Required parts are the parts that YOSHIMIURA Japan confirmed the installation during the development.
*Please prepare the appropriate parts if stock parts have been discontinued.
*The length of the throttle wire is the standard setting.Please note that it may vary depending on the installation method.
*The filter adapter included with this product is a machined aluminum product.
*There may be changes in product specifications due to the manufacturer's reasons.
Applicable Models
ALSO VIEWED PRODUCTS
Apply Coupon
Image Review
Review detail
/