Check my coupons
Quantity
100% Original
7 Days Warranty
Free Cashback
Net Price
Applicable Models
See All
ZX-6R 07-08
Product Detail
Specification:
[Specification]
・Cartridge cylinder diameter: 25mm
・Counter spring as standard equipment
[technical data]
・Recommended oil level: 135mm
・Standard spring rate: 9.0k
・Recommended fork oil: Matris Fork Oil R Type
・Effective cartridge stroke: 115mm
・Cartridge cylinder diameter: 25mm
・Counter spring as standard equipment
[technical data]
・Recommended oil level: 135mm
・Standard spring rate: 9.0k
・Recommended fork oil: Matris Fork Oil R Type
・Effective cartridge stroke: 115mm
[Description]
[Specification]
・The preload can be adjusted without using tools by adopting roller bearings for the bearing section.
・Use a 4mm hex wrench to adjust the rebound.
・The compression valve is included.
Matris Cartridge Kit F12R is an inner cartridge kit for inverted front forks.
The cartridge diameter is larger than stock to increase the damping range which is often lacking in stock.
The cartridge cylinder (25mm) made of duralumin 7075 is machine-cut with high precision and hard-anodized surface to improve durability.
The pumping rod (12mm) is also made of super duralumin and hard anodized.
Special pressure side adjustment valve is adopted depending on the type of vehicle, and the adjustment range is wider than stock adjustment valve, and fine adjustment is possible.
・Thrust bearing is used for the preload adjuster of the top cap, and it clicks every 180 degrees (0.5mm).
・Comes with a special compression valve.(Shims for compression valve included on some models)
・Rebound (rebound side) and compression (compression side) damping adjustment positions are the same as stock front forks.
・Special fork oil is included (SAE 5W equivalent).
・The preload can be adjusted without using tools by adopting roller bearings for the bearing section.
・Use a 4mm hex wrench to adjust the rebound.
・The compression valve is included.
Matris Cartridge Kit F12R is an inner cartridge kit for inverted front forks.
The cartridge diameter is larger than stock to increase the damping range which is often lacking in stock.
The cartridge cylinder (25mm) made of duralumin 7075 is machine-cut with high precision and hard-anodized surface to improve durability.
The pumping rod (12mm) is also made of super duralumin and hard anodized.
Special pressure side adjustment valve is adopted depending on the type of vehicle, and the adjustment range is wider than stock adjustment valve, and fine adjustment is possible.
・Thrust bearing is used for the preload adjuster of the top cap, and it clicks every 180 degrees (0.5mm).
・Comes with a special compression valve.(Shims for compression valve included on some models)
・Rebound (rebound side) and compression (compression side) damping adjustment positions are the same as stock front forks.
・Special fork oil is included (SAE 5W equivalent).
Note
* The image is only for reference. The image shown may differ from the actual product.
Caution
*There may be changes in product specifications due to the manufacturer's reasons.
*The overall length of the front fork will be longer after installing the cartridge kit.Please check the length before and after installation.
*The overall length of the front fork will be longer after installing the cartridge kit.Please check the length before and after installation.
Applicable Models
ZX-6R 07-08
