- Home
- Tools
- Hand tools
- Screwdrivers
- Impact Screwdrivers
- SK11
- SK11: Screw Removal Impact Screwdriver SID-312B
Screw Removal Impact Screwdriver SID-312B
- Product number: 4977292207133
-
- IN STOCK
- Out Stock
- SK11
- |
- 0.0
- (0 review)
Check my coupons
Quantity
100% Original
7 Days Warranty
Free Cashback
Net Price
Product Detail
Specification:
[Product specifications (attached bits)]
・-+1 x 50mm
・-+2 x 50mm
・-+3 x 50mm
・-6 x 50mm
・Stripped Phillips screw removal bit 100mm
[Standard] SID-312B
・-+1 x 50mm
・-+2 x 50mm
・-+3 x 50mm
・-6 x 50mm
・Stripped Phillips screw removal bit 100mm
[Standard] SID-312B
[Description]
The powerful turning power can turn even the screws with damaged grooves.
[Use]
Removing Screws with Crushed Grooves.
[Product Features]
The impact of the hammer is converted into rotational force to loosen tightened screws.
With a special bit for removing screws with damaged grooves by tapping with a hammer to make new grooves and remove screws.
Licked Phillips head screw removal bits are suitable for M3-M6 countersunk screws, flat head screws, truss screws, etc.
[Use]
Removing Screws with Crushed Grooves.
[Product Features]
The impact of the hammer is converted into rotational force to loosen tightened screws.
With a special bit for removing screws with damaged grooves by tapping with a hammer to make new grooves and remove screws.
Licked Phillips head screw removal bits are suitable for M3-M6 countersunk screws, flat head screws, truss screws, etc.
Caution
*Tanned Phillips screw removal bits cannot be used for very hard screws such as coarse threads, tapping screws, and drill screws.Hammering into them may damage the bit tip.
*Do not use it in the place where the hammer blow may damage or deform the screwed material.
*Do not use on anything that has electricity flowing through it.
*Use the correct size for screw.
*Wear protective goggles and protective equipment when working with this product.
*Do not use for any purpose other than that for which it was originally intended.
*There may be changes in product specifications due to the manufacturer's reasons.
*Do not use it in the place where the hammer blow may damage or deform the screwed material.
*Do not use on anything that has electricity flowing through it.
*Use the correct size for screw.
*Wear protective goggles and protective equipment when working with this product.
*Do not use for any purpose other than that for which it was originally intended.
*There may be changes in product specifications due to the manufacturer's reasons.
ALSO VIEWED PRODUCTS
Apply Coupon
Image Review
Review detail
/