- Home
- Tools
- Garage Equipments
- PROTOOLS
- PROTOOLS: Jack Stand 2T
Check my coupons
Quantity
100% Original
7 Days Warranty
Free Cashback
Net Price
Product Detail
Specification:
Color: Red
Quantity: 1 set (2 legs)
Weight: Main unit: 5.0kg (per unit)
Material: Steel
Specifications:
・Minimum height (mm): 275
・Maximum height (mm): 415
・Load capacity (1 unit): 2t
・10-step adjustment
Size: Base Size: W170 x D170mm
Quantity: 1 set (2 legs)
Weight: Main unit: 5.0kg (per unit)
Material: Steel
Specifications:
・Minimum height (mm): 275
・Maximum height (mm): 415
・Load capacity (1 unit): 2t
・10-step adjustment
Size: Base Size: W170 x D170mm
[Description]
Once raised with a jack, this product comes into play.
It is a standard tool for supporting after jack-up, which is called by various names such as "jack stand" or "rigid rack"!
One-touch operation by switching the lever of the ratchet handle.
This is a ratchet type rigid rack.
The 4-point axis is adopted for high stability.
The height of the saddle can be adjusted in 10 positions, so you can adjust the height like a ratchet according to the working conditions.
It is a standard tool for supporting after jack-up, which is called by various names such as "jack stand" or "rigid rack"!
One-touch operation by switching the lever of the ratchet handle.
This is a ratchet type rigid rack.
The 4-point axis is adopted for high stability.
The height of the saddle can be adjusted in 10 positions, so you can adjust the height like a ratchet according to the working conditions.
Caution
*Make sure to use two units at the same time.It is also very dangerous to use more than one unit.
*When using the product for the first time, be sure to fold the stopper to the inside with a punch.
*Check the installation location of the rigid rack with the maintenance manual.
*Adjust the height so that the bike is parallel to the floor.If the height is uneven, there is a possibility of falling.
*For safety reasons, please place wheeled tires or thick, solid objects (blocks) under the bike.
*Always stop the wheels before working.On a hard, flat, non-sloped floor, first jack up the bike using a garage jack/floor jack.
*When you are sure that there is no problem with the rigid rack, adjust the height of the saddle.Be sure to adjust the height of the two legs so that the bike is parallel to the ground.The height of the saddle should be such that the bike's tires are slightly raised.
*Carefully turn the release valve of the garage jack and slowly lower the bike.If you need to adjust the position of the rigid rack while the bike is descending, be sure to halt the bikes's descent first.
*There may be changes in product specifications due to the manufacturer's reasons.
*When using the product for the first time, be sure to fold the stopper to the inside with a punch.
*Check the installation location of the rigid rack with the maintenance manual.
*Adjust the height so that the bike is parallel to the floor.If the height is uneven, there is a possibility of falling.
*For safety reasons, please place wheeled tires or thick, solid objects (blocks) under the bike.
*Always stop the wheels before working.On a hard, flat, non-sloped floor, first jack up the bike using a garage jack/floor jack.
*When you are sure that there is no problem with the rigid rack, adjust the height of the saddle.Be sure to adjust the height of the two legs so that the bike is parallel to the ground.The height of the saddle should be such that the bike's tires are slightly raised.
*Carefully turn the release valve of the garage jack and slowly lower the bike.If you need to adjust the position of the rigid rack while the bike is descending, be sure to halt the bikes's descent first.
*There may be changes in product specifications due to the manufacturer's reasons.
ALSO VIEWED PRODUCTS
Apply Coupon
Image Review
Review detail
/