- Home
- Model
- BMW 1001cc -
- R1250GS Adventure
- Motorcycle Parts
- Bodyworks
- Rear Racks
- GIVI
- GIVI: Aluminum Special Rack [SRA5112]
Check my coupons
Product Detail
Specification:
Maximum loading weight (monokey top case): 6kg
Compatible Top Cases: Mono key (without stop lamp)
Specified items to be installed at the same time: Attached Mono Key Base (SRA)
Compatible Top Cases: Mono key (without stop lamp)
Specified items to be installed at the same time: Attached Mono Key Base (SRA)
[Description]
Required to fit GIVI Monokey Top Case.
Aluminum base for monokey included.
Aluminum base for monokey included.
Note
* The image is only for reference. The image shown may differ from the actual product.
Caution
*R1200GS Adventure LC ('14-'17) (Water-cooled): Exclusive for stock grab rail carrier / rear fender.Be careful not to damage the stock carrier.
*Cases with stop lamps (including retrofitted cases) are not allowed because contact points cannot be installed.
*This product can be installed with stock side case.
*GIVI fittings and Daytona original fittings should not be used on non-GIVI cases.Daytona and GIVI cannot be held responsible in any way for the use of non-GIVI cases.
*There may be differences in painting, welding, surface treatment, scratches, burrs, and distortions due to product materials, manufacturing methods, individual product differences, and overseas shipping conditions.
*Due to the individual difference between the product and the vehicle, there is a possibility of hole misalignment, difference in parallelism between front and rear, left and right, and contact with the vehicle cowl, etc. Therefore, it is recommended to have the installation work done by a skilled mechanic at a well-equipped motorcycle shop or certified maintenance facility.For installation, temporarily fasten each part and finally tighten them while observing the condition.
*There may be changes in product specifications due to the manufacturer's reasons.
*Cases with stop lamps (including retrofitted cases) are not allowed because contact points cannot be installed.
*This product can be installed with stock side case.
*GIVI fittings and Daytona original fittings should not be used on non-GIVI cases.Daytona and GIVI cannot be held responsible in any way for the use of non-GIVI cases.
*There may be differences in painting, welding, surface treatment, scratches, burrs, and distortions due to product materials, manufacturing methods, individual product differences, and overseas shipping conditions.
*Due to the individual difference between the product and the vehicle, there is a possibility of hole misalignment, difference in parallelism between front and rear, left and right, and contact with the vehicle cowl, etc. Therefore, it is recommended to have the installation work done by a skilled mechanic at a well-equipped motorcycle shop or certified maintenance facility.For installation, temporarily fasten each part and finally tighten them while observing the condition.
*There may be changes in product specifications due to the manufacturer's reasons.
Applicable Models
ALSO VIEWED PRODUCTS
Apply Coupon
Image Review
Review detail
/