- Home
- Model
- YAMAHA 51 - 125cc
- CYGNUS X 125 (NCX125)
- Motorcycle Parts
- Brakes
- Brake Caliper Brackets
- KN Planning
- KN Planning: Caliper Support
Check my coupons
Product Detail
Specification:
For Brembo 4POT calipers + 260mm disc rotors
[Description]
This caliper support is specially designed for Brembo 4POT calipers and 260mm disc rotors.
Basically for stock front forks.
Basically for stock front forks.
Caution
*Depending on the type of fork you are using, you may need to modify the support.
*Depending on the type of 260mm disc used, there may be interference with the brake pads when using the floating type.Please think carefully about the combination.
*The recommended DISC bu KN Planning is NXC125-DISK-B.
*If you want to use the support stainless bolt, please purchase the 1.5mm pitch (product code BOLT-11) for Brembo 4POT caliper and 1.25mm pitch (product code BOLT-04) for KN Planning 4POT caliper at the same time.
*There may be changes in product specifications due to the manufacturer's reasons.
*Depending on the type of 260mm disc used, there may be interference with the brake pads when using the floating type.Please think carefully about the combination.
*The recommended DISC bu KN Planning is NXC125-DISK-B.
*If you want to use the support stainless bolt, please purchase the 1.5mm pitch (product code BOLT-11) for Brembo 4POT caliper and 1.25mm pitch (product code BOLT-04) for KN Planning 4POT caliper at the same time.
*There may be changes in product specifications due to the manufacturer's reasons.
Applicable Models
ALSO VIEWED PRODUCTS
Apply Coupon
Image Review
Review detail
/