- Home
- Motorcycle Parts
- Brakes
- Other Brake Master Cylinder Options / Repair Parts
- Neofactory
- Neofactory: Old School Hand Control Kit
Check my coupons
Product Detail
Specification:
[Color]
polish
[Material]
Aluminum
[Size]
Bore Diameter: 7/16"
Clamp: 1inch
Banjo Bolt Size: 3/8-24
Handlebar clamp part bolt size: 1/4-20 x 1"
[Components]
022949 Brake control assy x 1
015927 Clutch Control Assy x 1
015935 Model Exclusive mirror stem x 1
Seal for DOT4 x 2
polish
[Material]
Aluminum
[Size]
Bore Diameter: 7/16"
Clamp: 1inch
Banjo Bolt Size: 3/8-24
Handlebar clamp part bolt size: 1/4-20 x 1"
[Components]
022949 Brake control assy x 1
015927 Clutch Control Assy x 1
015935 Model Exclusive mirror stem x 1
Seal for DOT4 x 2
[Description]
This is the hand control kit with a simple design that is ideal for customizing the handlebar area to make it look neat.
It also goes great with the Old School Chopper!
It is a beautiful polish specification and makes your customization more attractive.
A special mirror stem that can be used to replace the pivot is also included!
Includes pivot pin for 4th & 5th gear and later clutch cables!
The master bore is designed for single disc vehicles.
It also goes great with the Old School Chopper!
It is a beautiful polish specification and makes your customization more attractive.
A special mirror stem that can be used to replace the pivot is also included!
Includes pivot pin for 4th & 5th gear and later clutch cables!
The master bore is designed for single disc vehicles.
Caution
*Please check and clean sludge before installation.
*Please do not over-tighten the top cover of the Master.
*Some banjo bolts may be difficult to tighten depending on their compatibility, so be sure to prepare the threads for use.
*Please note that the hammer of the brake lever presses down on the piston, so if you remove the brake lever while it is installed on the vehicle, the piston will come out and fluid may leak out.
*When using DOT4, please replace the seal with the enclosed seal.
*Mirror stems that conform to the stock housing are not compatible.
*Please use the supplied mirror stem.
*There may be changes in product specifications due to the manufacturer's reasons.
*Please do not over-tighten the top cover of the Master.
*Some banjo bolts may be difficult to tighten depending on their compatibility, so be sure to prepare the threads for use.
*Please note that the hammer of the brake lever presses down on the piston, so if you remove the brake lever while it is installed on the vehicle, the piston will come out and fluid may leak out.
*When using DOT4, please replace the seal with the enclosed seal.
*Mirror stems that conform to the stock housing are not compatible.
*Please use the supplied mirror stem.
*There may be changes in product specifications due to the manufacturer's reasons.
ALSO VIEWED PRODUCTS
Apply Coupon
Image Review
Review detail
/