Check my coupons
Quantity
100% Original
7 Days Warranty
Free Cashback
Net Price
Applicable Models
See All
Mainly single caliper cars with 1 inch handle
Product Detail
Specification:
[Color]
polish
[Material]
Aluminum
[Size]
Bore Diameter: 7/16"
Clamp: 1inch
Banjo Bolt Size: 3/8-24
Handlebar clamp part bolt size: 1/4-20 x 1"
[Components]
Brake control assembly x 1
015935 Model Exclusive mirror stem x 1
Seal for DOT4 x 2
polish
[Material]
Aluminum
[Size]
Bore Diameter: 7/16"
Clamp: 1inch
Banjo Bolt Size: 3/8-24
Handlebar clamp part bolt size: 1/4-20 x 1"
[Components]
Brake control assembly x 1
015935 Model Exclusive mirror stem x 1
Seal for DOT4 x 2
[Description]
This is the hand control kit with a simple design that is ideal for customizing the handlebar area to make it look neat.
It also goes great with the Old School Chopper!
It is a beautiful polish specification and produces a beautiful handlebar area.
The master bore is designed for single disc vehicles.
A special mirror stem that can be used to replace the pivot is also included!
It also goes great with the Old School Chopper!
It is a beautiful polish specification and produces a beautiful handlebar area.
The master bore is designed for single disc vehicles.
A special mirror stem that can be used to replace the pivot is also included!
Caution
*Please check and clean sludge before installation.
*Please do not over-tighten the top cover of the Master.
*Some banjo bolts may be difficult to tighten depending on their compatibility, so be sure to prepare the threads for use.
*Please note that the hammer of the brake lever presses down on the piston, so if you remove the brake lever while it is installed on the vehicle, the piston will come out and fluid may leak out.
*When using DOT4, please replace the seal with the enclosed seal.
*Mirror stems that conform to the stock housing are not compatible.
*Please use the supplied mirror stem.
*There may be changes in product specifications due to the manufacturer's reasons.
*Please do not over-tighten the top cover of the Master.
*Some banjo bolts may be difficult to tighten depending on their compatibility, so be sure to prepare the threads for use.
*Please note that the hammer of the brake lever presses down on the piston, so if you remove the brake lever while it is installed on the vehicle, the piston will come out and fluid may leak out.
*When using DOT4, please replace the seal with the enclosed seal.
*Mirror stems that conform to the stock housing are not compatible.
*Please use the supplied mirror stem.
*There may be changes in product specifications due to the manufacturer's reasons.
Applicable Models
Mainly single caliper cars with 1 inch handle
