Check my coupons
Product Detail
[Description]
SR400 / 500 Clutch Wire Adjustment Adapter
The space of the wire can be adjusted which is common in the clutch holders other than those made by BORE ACE.
This product is used by inserting it into the wire fitting on the engine side.
The new concept adjusts the play of the wire.
[installation instructions]
1: Fully tighten the adjustment on the holder side and loosen the wire.
2: After loosening the wire, pull it by hand to check the gap.*The gap must be at least 4mm to be used.
3: Pull out the wire with pliers and insert it into the wire fitting in the correct direction.
When inserting or removing the wires from the fittings, use pliers to grip the fittings on the engine side for easy removal.
The space of the wire can be adjusted which is common in the clutch holders other than those made by BORE ACE.
This product is used by inserting it into the wire fitting on the engine side.
The new concept adjusts the play of the wire.
[installation instructions]
1: Fully tighten the adjustment on the holder side and loosen the wire.
2: After loosening the wire, pull it by hand to check the gap.*The gap must be at least 4mm to be used.
3: Pull out the wire with pliers and insert it into the wire fitting in the correct direction.
When inserting or removing the wires from the fittings, use pliers to grip the fittings on the engine side for easy removal.
Note
Click here for the Wire Injector
Caution
*The gap must be at least 4mm to be used.
*The product images are taken with a longer length than the actual product to make it easier to understand.
*Images may contain other products.
*Images are for reference only.
*There may be changes in product specifications due to the manufacturer's reasons.
*The product images are taken with a longer length than the actual product to make it easier to understand.
*Images may contain other products.
*Images are for reference only.
*There may be changes in product specifications due to the manufacturer's reasons.
