Check my coupons
Product Detail
Specification:
Country of origin :China
Manufacturer: KEPSPEED
Manufacturer: KEPSPEED
[Description]
This is a stainless steel exhaust for horizontal engines such as MONKEY / GORILLA.
The silencer is a megaphone type.
There are two types of exhaust pipes as shown in the images, tornado type and straight type.
In general, the tornado type with longer exhaust pipe should be quieter, but I don't think there is much difference because the silencer is shorter.
The silencer is a megaphone type.
There are two types of exhaust pipes as shown in the images, tornado type and straight type.
In general, the tornado type with longer exhaust pipe should be quieter, but I don't think there is much difference because the silencer is shorter.
Caution
[Notes on purchase]
*All GM-MOTO products are custom parts.Since these products are set up in response to the requests of heavy users, there may be parts of the product that change or decrease from the original driving performance.Please use as dress-up parts for show model machines.Therefore, it is not suitable for driving on public roads or tracks.In some cases, it may not be possible to mount the unit on a motorcycle, or adjustments and modifications may be required in various areas.
*There may be changes in product specifications due to the manufacturer's reasons.
※ There may be some minor specification changes for each product.
※ For each product, there are a few points that differ slightly from the image introduced in detail, but GM-MOTO will give priority to the actual product.
*[Installation]
・It can be used only with the stock width swingarm.
・Not compatible with wide (5.5J) or super wide (7.0J) swingarm.
・If using it with wide swingarm, you need to modify the silencer bracket, stock suspension holder and exhaust pipe separately or make one by yourself.
・The silencer bracket must be tightened together with the upper suspension support.If installing the exhaust without using the bracket, the engine, the gasket and the surrounding area will be strongly stressed, and in the worst case, it will be damaged.
・Because this is a down exhaust, it is not recommended to install on vehicles with extremely low down specifications.
・After the start of riding, pay attention to the occurrence of so-called "initial loosening" and perform frequent inspections to prevent unexpected problems.
・Please have the assembly done in a specialized store regarding motorcycle maintenance.
*Because it is made overseas, the molding, welding, painting, etc. may be insufficient.There may be some minor scratches and scuffs due to transportation problems.
*All GM-MOTO products are custom parts.Since these products are set up in response to the requests of heavy users, there may be parts of the product that change or decrease from the original driving performance.Please use as dress-up parts for show model machines.Therefore, it is not suitable for driving on public roads or tracks.In some cases, it may not be possible to mount the unit on a motorcycle, or adjustments and modifications may be required in various areas.
*There may be changes in product specifications due to the manufacturer's reasons.
※ There may be some minor specification changes for each product.
※ For each product, there are a few points that differ slightly from the image introduced in detail, but GM-MOTO will give priority to the actual product.
*[Installation]
・It can be used only with the stock width swingarm.
・Not compatible with wide (5.5J) or super wide (7.0J) swingarm.
・If using it with wide swingarm, you need to modify the silencer bracket, stock suspension holder and exhaust pipe separately or make one by yourself.
・The silencer bracket must be tightened together with the upper suspension support.If installing the exhaust without using the bracket, the engine, the gasket and the surrounding area will be strongly stressed, and in the worst case, it will be damaged.
・Because this is a down exhaust, it is not recommended to install on vehicles with extremely low down specifications.
・After the start of riding, pay attention to the occurrence of so-called "initial loosening" and perform frequent inspections to prevent unexpected problems.
・Please have the assembly done in a specialized store regarding motorcycle maintenance.
*Because it is made overseas, the molding, welding, painting, etc. may be insufficient.There may be some minor scratches and scuffs due to transportation problems.
