16in.APE Bar (VINTAGE/Black-OPS)
- Product number: DRA-0601-1845
Check my coupons
Product Detail
Specification:
■Finish:BlackOPS
[Size]
・16"Handlebar:Width 36-1/2"(approx. 927mm),Height 16"(approx. 406.5mm),Center width 9-3/4"(approx. 247mm),Pull back 6"(approx. 152.5mm)
Knurl processing width for Riser:Approx. 3-1/2" (8.9 cm) center to center
1" for both center and end sections.
[Size]
・16"Handlebar:Width 36-1/2"(approx. 927mm),Height 16"(approx. 406.5mm),Center width 9-3/4"(approx. 247mm),Pull back 6"(approx. 152.5mm)
Knurl processing width for Riser:Approx. 3-1/2" (8.9 cm) center to center
1" for both center and end sections.
[Description]
・The plate with holes in the corners enhances the design and strength.
・There is a hole for the wiring to pass through.
・There is knurling for risers.
・The 1in diameter allows the use of stock hand control and switch housings.
・Black OPS bars come with black end caps.
・There is a hole for the wiring to pass through.
・There is knurling for risers.
・The 1in diameter allows the use of stock hand control and switch housings.
・Black OPS bars come with black end caps.
Caution
*This product cannot be installed on Springer.
*Images of different sizes and finishes are used.
*The image contains other colors.
*There may be changes in product specifications due to the manufacturer's reasons.
*Images of different sizes and finishes are used.
*The image contains other colors.
*There may be changes in product specifications due to the manufacturer's reasons.
