- Home
- Motorcycle Parts
- Handles & Control Parts
- Other Handle Parts
- Neofactory
- Neofactory: [Eastern Motorcycle Parts] Neck Cup Bearing Dust Shield Set
[Eastern Motorcycle Parts] Neck Cup Bearing Dust Shield Set
- Product number: 029078
-
- IN STOCK
- Out Stock
- Neofactory
- |
- 0.0
- (0 review)
Check my coupons
Product Detail
Specification:
Manufacturer's Part Number: V-13-248
OEM Part Number / Cross Reference: 48361-80, 48365-48A
[Components]
・Upper shield x 1pc.
・Lower Shield x 1
OEM Part Number / Cross Reference: 48361-80, 48365-48A
[Components]
・Upper shield x 1pc.
・Lower Shield x 1
[Description]
It is a high-precision part made by Eastern Motorcycle Parts, a treasure house of replacement parts that continues to support the supply of parts in the industry, especially for the old model Harley-Davidson, so that you can continue to ride forever.
Please use it as a replacement of stock parts for overhaul.
Please use it as a replacement of stock parts for overhaul.
Caution
*Please check the OEM part no before purchasing.
*Repair and replacement work requires specialized knowledge, skills, and special tools.
*There is a case that some rust, oil stains, etc. are seen on the nature of the material though it is new and unused.
*These can be cleaned before use without any problems.
*There may be changes in product specifications due to the manufacturer's reasons.
WARNING!(Important notice!)
Thank you very much for your interest in Neofactory's front-end products.
Please make sure to read the following warnings before using the front end.
Failure to heed these warnings may result in death or serious injury.
It may also cause damage to the vehicle.
Warning!
1. The front end is designated as an important safety component.Please contact a qualified mechanic for installation.
2. After replacing the front end, please make sure to check that the handlebars work properly and that there is no rattling, etc., before driving.
3. Operability is changed by replacing the front end.Avoid high speed riding until you get used to the controls.
4. If any abnormality is found, such as damage to parts, rattling of the handle, or change in operating feel, stop using the product immediately and consult the store where the work was performed.Do not use the product until the problem is corrected.
Neo Factory cannot provide any information on how to install the product.
Speed moderately, obey traffic rules, and ride safely.
*Repair and replacement work requires specialized knowledge, skills, and special tools.
*There is a case that some rust, oil stains, etc. are seen on the nature of the material though it is new and unused.
*These can be cleaned before use without any problems.
*There may be changes in product specifications due to the manufacturer's reasons.
WARNING!(Important notice!)
Thank you very much for your interest in Neofactory's front-end products.
Please make sure to read the following warnings before using the front end.
Failure to heed these warnings may result in death or serious injury.
It may also cause damage to the vehicle.
Warning!
1. The front end is designated as an important safety component.Please contact a qualified mechanic for installation.
2. After replacing the front end, please make sure to check that the handlebars work properly and that there is no rattling, etc., before driving.
3. Operability is changed by replacing the front end.Avoid high speed riding until you get used to the controls.
4. If any abnormality is found, such as damage to parts, rattling of the handle, or change in operating feel, stop using the product immediately and consult the store where the work was performed.Do not use the product until the problem is corrected.
Neo Factory cannot provide any information on how to install the product.
Speed moderately, obey traffic rules, and ride safely.
ALSO VIEWED PRODUCTS
Apply Coupon
Image Review
Review detail
/