Check my coupons
Quantity
100% Original
7 Days Warranty
Free Cashback
Net Price
Applicable Models
See All
M8 Softail Model 18-
FLFB 18-
FLFBS 18-
FXBB 18-
FXBBS 18-
FXBR 18-
FXBRS 18-
FXLR 18-
FXLRS 18-
FXST 18-
FLSL 18-
Show more
Product Detail
Specification:
Material: Steel
1 set of 2 pieces
1 set of 2 pieces
[Description]
To highlight the shotgun style, the design is slender with a diameter of Φ70 (2.75) and a short turnout length.
The exhaust pipe is a slip-on that remains stock, but gives the impression as if it had been converted with a full exhaust system.
Along with numerous injection tuning installations, we spoke with various Harley owners.
As a result, the design emphasizes torque at low and medium speeds rather than maximum horsepower at high rpm.
The volume is kept low and the sound is pleasant and low-pitched, typical of Harley.
Few people regularly use the rpm range above 5000 rpm.
It has a lively torque at 2000-3000rpm, and when wide open to over 4000rpm at times, and even on long tours, it has a pleasant, tireless, comfortable sound and torque at low and mid speeds!
Repeated tests on the chassis dynamometer were conducted to achieve the fullest "sound".
What is Cerakote.
The most attractive feature of this paint is its heat resistance temperature of 1100-1200 degrees.
It is highly resistant to corrosion and solvents, and is also used by VANCE & HINES.
In addition, the heat dissipation is good, so it is difficult to keep the heat in.
Cerakote is applied to keep my Ikkoku slip-on exhaust looking great.
The exhaust pipe is a slip-on that remains stock, but gives the impression as if it had been converted with a full exhaust system.
Along with numerous injection tuning installations, we spoke with various Harley owners.
As a result, the design emphasizes torque at low and medium speeds rather than maximum horsepower at high rpm.
The volume is kept low and the sound is pleasant and low-pitched, typical of Harley.
Few people regularly use the rpm range above 5000 rpm.
It has a lively torque at 2000-3000rpm, and when wide open to over 4000rpm at times, and even on long tours, it has a pleasant, tireless, comfortable sound and torque at low and mid speeds!
Repeated tests on the chassis dynamometer were conducted to achieve the fullest "sound".
What is Cerakote.
The most attractive feature of this paint is its heat resistance temperature of 1100-1200 degrees.
It is highly resistant to corrosion and solvents, and is also used by VANCE & HINES.
In addition, the heat dissipation is good, so it is difficult to keep the heat in.
Cerakote is applied to keep my Ikkoku slip-on exhaust looking great.
Caution
*This part is for the closed circuit only.
*When installing on softail models after 2021, the rear O2 sensor cannot be installed and an error will occur.O2 sensor can be cancelled by injection tuning installation.
*Not compatible with FLDE, FLHC, and FLHCS.
*Four 12-point exhaust bolts are required when using the exhaust bolts.
*There may be changes in product specifications due to the manufacturer's reasons.
Applicable Models
M8 Softail Model 18-
FLFB 18-
FLFBS 18-
FXBB 18-
FXBBS 18-
FXBR 18-
FXBRS 18-
FXLR 18-
FXLRS 18-
FXST 18-
FLSL 18-
Show more
