- Home
- Model
- SUZUKI 51 - 125cc
- GSX-S125
- Motorcycle Parts
- Suspensions / Rearsets / Wheels / Swingarms
- Suspensions
- Lowring Kit
- METAL GEAR
- METAL GEAR: Lowering Kit & Side Stand Set (40-50mm Down)
Lowering Kit & Side Stand Set (40-50mm Down)
- Product number: GSX125-1141
-
- IN STOCK
- Out Stock
- METAL GEAR
- |
- 5.0
- (1 reviews)
Check my coupons
Product Detail
Specification:
[Material] Steel
[Components] Short side stand for lowering
[Components] Short side stand for lowering
[Description]
It is easier to keep the seating position to the rear than to the front.
This reduces the load on the upper body and provides an ideal riding position.
Seat height adjustable range: Infinitely adjustable from approx. 40mm -50mm down.
This reduces the load on the upper body and provides an ideal riding position.
Seat height adjustable range: Infinitely adjustable from approx. 40mm -50mm down.
Caution
*Cannot be used by two epople, must remove the swingarm fender and install the supplied short stand.
*Do not install or use the product without following the instructions in the instruction manual.
*This product is for use only on the target bike.This product cannot be installed on other bikes.
*The work should be performed by a person with skills and knowledge.
*Please use only suitable tools for this work.
*Tighten to the proper torque, and be sure to check each part for looseness of the screws and other parts before riding.
*After installing the lowering kit, it is necessary to adjust the chain play.
*Do not use the stock short bolts.Both of the stock nuts are reused.
*This product was developed for racingHowever, periodic cleaning, lubrication, and other maintenance is required.
*These are consumable parts and may need to be replaced periodically.
*The specifications of this product are subject to change without notice to improve performance.
*Do not install or use the product without following the instructions in the instruction manual.
*This product is for use only on the target bike.This product cannot be installed on other bikes.
*The work should be performed by a person with skills and knowledge.
*Please use only suitable tools for this work.
*Tighten to the proper torque, and be sure to check each part for looseness of the screws and other parts before riding.
*After installing the lowering kit, it is necessary to adjust the chain play.
*Do not use the stock short bolts.Both of the stock nuts are reused.
*This product was developed for racingHowever, periodic cleaning, lubrication, and other maintenance is required.
*These are consumable parts and may need to be replaced periodically.
*The specifications of this product are subject to change without notice to improve performance.
Applicable Models
ALSO VIEWED PRODUCTS
Apply Coupon
Image Review
Review detail
/