Check my coupons
Product Detail
Specification:
[Product Description]
Contains 2sets
Joint Male: 2pcs.
Joint female: 2pcs.
[Material]
Stainless steel SUS304
[Rivet size]
Diameter 3.2mm, Thickness 6.4mm
Contains 2sets
Joint Male: 2pcs.
Joint female: 2pcs.
[Material]
Stainless steel SUS304
[Rivet size]
Diameter 3.2mm, Thickness 6.4mm
[Description]
DMR-JAPAN original parts.
This is a universal joint to connect the lower parts of the left and right under cowl!
Many cowl claws are made of the same plastic as the cowl itself, so there are minor problems that can cause damage due to tipping over or age-related deterioration.
The repair parts will solve such a problem just one time!
The material is SUS304 stainless steel, which is excellent for mechanical parts and is tenacious and rust-resistant!
This is a reproduction of the stock (steel) product used in the early years of the NSR250R, so the 86-88 model can be replaced with a bolt-on.
This is a universal joint to connect the lower parts of the left and right under cowl!
Many cowl claws are made of the same plastic as the cowl itself, so there are minor problems that can cause damage due to tipping over or age-related deterioration.
The repair parts will solve such a problem just one time!
The material is SUS304 stainless steel, which is excellent for mechanical parts and is tenacious and rust-resistant!
This is a reproduction of the stock (steel) product used in the early years of the NSR250R, so the 86-88 model can be replaced with a bolt-on.
Caution
*Installation requires machining of the hinge portion for clearance, drilling, and riveting or bolting.
*The female side (with bar) should be attached to the left side of the cowl to facilitate cowl removal and attachment.
*Please be careful of the side of the mounting.The protruding side of the hinge faces the ground.
*There may be changes in product specifications due to the manufacturer's reasons.
*The female side (with bar) should be attached to the left side of the cowl to facilitate cowl removal and attachment.
*Please be careful of the side of the mounting.The protruding side of the hinge faces the ground.
*There may be changes in product specifications due to the manufacturer's reasons.
