Check my coupons
Product Detail
Specification:
Country of origin :China
Manufacturer: KEPSPEED
Manufacturer: KEPSPEED
[Description]
KEPSPEED Front Reinforced Damper for Monkey!
It was a shame that the stock or stock-type inner suspension lacked stability due to its construction.
Simply replacing them with reinforced springs is not very effective, and replacing them with inner suspension with dampers is a bit pricey.
That's where this external reinforced damper comes in!
At first glance, it may appear unreliable and thin, but it is in fact quite powerful and firmly assists the spring.
And the price is kept low enough to give it an even more custom look and feel!It is a great transformation into a bike that feels like it is buzzing along.
The body material is stainless steel.
Only the upper mounting bracket is machined from aluminum.
The bracket is anodized as a surface treatment, so the damper as a whole is resistant to rust even when run in the rain, making it an excellent model in terms of durability.
Brackets are pinched from the outside of the large
Axle part is fixed by hooking the projection of the fixing part to the inner suspension
It was a shame that the stock or stock-type inner suspension lacked stability due to its construction.
Simply replacing them with reinforced springs is not very effective, and replacing them with inner suspension with dampers is a bit pricey.
That's where this external reinforced damper comes in!
At first glance, it may appear unreliable and thin, but it is in fact quite powerful and firmly assists the spring.
And the price is kept low enough to give it an even more custom look and feel!It is a great transformation into a bike that feels like it is buzzing along.
The body material is stainless steel.
Only the upper mounting bracket is machined from aluminum.
The bracket is anodized as a surface treatment, so the damper as a whole is resistant to rust even when run in the rain, making it an excellent model in terms of durability.
Brackets are pinched from the outside of the large
Axle part is fixed by hooking the projection of the fixing part to the inner suspension
Caution
[Notes on purchase]
*All GM-MOTO products are custom parts.Since these products are set up in response to the requests of heavy users, there may be parts of the product that change or decrease from the original driving performance.Please use as dress-up parts for show model machines.Therefore, it is not suitable for driving on public roads or tracks.In some cases, it may not be possible to mount the unit on a motorcycle, or adjustments and modifications may be required in various areas.
*This product is compatible with stock front fork outer.
*Only outer diameter of Φ34mm can be attached.When attaching to other diameter outer bodies, a separate bracket suitable for that outer diameter is required.
*Installation is recommended on the left side of the bike.Symmetrical product, so it can be installed on the right side as well, but it requires modification of brake lines.
*After installation, please check for any problems / interference in the operation of related parts and make sure that all parts are securely fastened.Also, be sure to install the product in such a way that strong force is not applied to it from any direction other than the axial direction.If the stroking arm is bent, it will not be able to stroke properly, and in the worst case, it may be damaged.
※ There may be some minor specification changes for each product.There may be some points that differ slightly from the introduction image.
*Please have assembly work done in a specialist shop regarding motorcycle maintenance.
*After the start of running, please pay attention to the occurrence of so-called "initial loosening" and perform frequent inspections to avoid unexpected problems.
*Because it is made overseas, the molding, welding, painting, etc. may be insufficient.There may be some minor scratches and scuffs due to transportation problems.
*There may be changes in product specifications due to the manufacturer's reasons.
※ Some minor scratches and scuffs may occur due to transportation issues.
*All GM-MOTO products are custom parts.Since these products are set up in response to the requests of heavy users, there may be parts of the product that change or decrease from the original driving performance.Please use as dress-up parts for show model machines.Therefore, it is not suitable for driving on public roads or tracks.In some cases, it may not be possible to mount the unit on a motorcycle, or adjustments and modifications may be required in various areas.
*This product is compatible with stock front fork outer.
*Only outer diameter of Φ34mm can be attached.When attaching to other diameter outer bodies, a separate bracket suitable for that outer diameter is required.
*Installation is recommended on the left side of the bike.Symmetrical product, so it can be installed on the right side as well, but it requires modification of brake lines.
*After installation, please check for any problems / interference in the operation of related parts and make sure that all parts are securely fastened.Also, be sure to install the product in such a way that strong force is not applied to it from any direction other than the axial direction.If the stroking arm is bent, it will not be able to stroke properly, and in the worst case, it may be damaged.
※ There may be some minor specification changes for each product.There may be some points that differ slightly from the introduction image.
*Please have assembly work done in a specialist shop regarding motorcycle maintenance.
*After the start of running, please pay attention to the occurrence of so-called "initial loosening" and perform frequent inspections to avoid unexpected problems.
*Because it is made overseas, the molding, welding, painting, etc. may be insufficient.There may be some minor scratches and scuffs due to transportation problems.
*There may be changes in product specifications due to the manufacturer's reasons.
※ Some minor scratches and scuffs may occur due to transportation issues.
