Check my coupons
Product Detail
Specification:
Mounting Hole Center-Center Length:Approximately 340mm
Spring O.D.:65mm
Spring wire diameter:8.1mm
ROD diameter:12.3mm
Upper Side Mounting Hole Inner Diameter:14mm
Lower Side Mounting Hole Inner Diameter:14mm
Upper Side Mounting Part Thickness:18.3mm
Lower Side Mounting Part Thickness:20.0mm
Tank diameter:49mm
Spring O.D.:65mm
Spring wire diameter:8.1mm
ROD diameter:12.3mm
Upper Side Mounting Hole Inner Diameter:14mm
Lower Side Mounting Hole Inner Diameter:14mm
Upper Side Mounting Part Thickness:18.3mm
Lower Side Mounting Part Thickness:20.0mm
Tank diameter:49mm
[Description]
●Based on the concept of providing a suspension that can be used with assurance, this is an original suspension that has been completed through many trials and errors from planning and development to commercialization.
●In order to achieve low cost, the parts that make up the suspension are manufactured at partner factories overseas, while the final assembly, nitrogen gas injection, product inspection before shipment, and other important tasks are handled by specialized staff at U-CP's factories in Japan.
●U-CP has increased the tank capacity, increased the spring wire diameter by 1mm, and increased the spring outer diameter by 5mm, so the ride will not be too soft and fluffy.
●The upper and lower rubber bushings are manufactured in Japan, so they are resistant to deterioration and can be used just like the stock.
●It will be lowered up to 25mm lower than the stock suspension.
●The semi-color order system allows you to choose from 45 different color variations.
If you wish to order, please specify the spring color and the upper and lower ring colors referring to the third picture.
●The spring preload can be full adjustable.
● Since the ride height is lower than the stock suspension, please set the preload harder when riding pillion.
●When lowered, the bike will stand upright.
Adjust the tilt of the side stand.
●The center stand can be used, but it is very heavy when lifting the bike because the tires do not touch the ground.
●Damping pressure cannot be adjusted.
●The preload adjustment wrench and hex wrench are included.
●In order to achieve low cost, the parts that make up the suspension are manufactured at partner factories overseas, while the final assembly, nitrogen gas injection, product inspection before shipment, and other important tasks are handled by specialized staff at U-CP's factories in Japan.
●U-CP has increased the tank capacity, increased the spring wire diameter by 1mm, and increased the spring outer diameter by 5mm, so the ride will not be too soft and fluffy.
●The upper and lower rubber bushings are manufactured in Japan, so they are resistant to deterioration and can be used just like the stock.
●It will be lowered up to 25mm lower than the stock suspension.
●The semi-color order system allows you to choose from 45 different color variations.
If you wish to order, please specify the spring color and the upper and lower ring colors referring to the third picture.
●The spring preload can be full adjustable.
● Since the ride height is lower than the stock suspension, please set the preload harder when riding pillion.
●When lowered, the bike will stand upright.
Adjust the tilt of the side stand.
●The center stand can be used, but it is very heavy when lifting the bike because the tires do not touch the ground.
●Damping pressure cannot be adjusted.
●The preload adjustment wrench and hex wrench are included.
Caution
*The image is for reference only.The size of the collar may vary depending on the model.
*There may be some small scratches on the product during production or transportation.
*The image may contain other colors.
*There may be changes in product specifications due to the manufacturer's reasons.
*There may be some small scratches on the product during production or transportation.
*The image may contain other colors.
*There may be changes in product specifications due to the manufacturer's reasons.
