- Home
- Model
- HONDA 1001cc -
- CB1300SF (Super Four)
- Motorcycle Parts
- Engine Parts
- Radiators
- Radiator Core Guards
- ETCHING FACTORY
- ETCHING FACTORY: Radiator core guard B
Radiator core guard B
- Product number: RGH-CB1300-01B
-
- IN STOCK
- Out Stock
- ETCHING FACTORY
- |
- 0.0
- (0 review)
Check my coupons
Product Detail
Specification:
All emblem colors included (black, red, blue, yellow, green)
[Description]
■Why is this necessary?
How do we balance the conflicting themes of "cooling efficiency" and "protection performance"?
Pebbles and debris rolled up from the front tires, insects flying at the lights...etc. These things can damage the radiator core, which is made of aluminum fins.
When the fins are crushed, the cooling effect is lost, and in some cases, the water line may be damaged, causing a coolant leak...
■Features made by Etching Factory
Etching Factory's radiator core guard has been tested many times, mainly in the midsummer 8-hour endurance road race, which can be said to be the most severe on the radiator.
The placement of the mesh pattern, the thickness of the mesh lines, and the aperture ratio are all based on feedback from the racing scene.
Fine mesh pattern in the center and coarse mesh pattern on both sides.
This ensures that pebbles and debris spun off from the front tire are guarded by a fine mesh in the center that matches the width of the tire.
The coarse meshes on both sides are designed with an aperture ratio that takes into account the conflicting themes of cooling efficiency and protection.
■There is also a reason for the choice of material.
The mesh line width, which can only be achieved by reducing the plate thickness (strength reduction) in the case of aluminum and titanium, is realized by using stainless steel (SUS304 0.8t) without reducing the strength of the ideal line width.
Based on the above, the core guard is not only an item to maintain the performance of the vehicle, but also has a dress-up effect to show off the beauty of the vehicle in a casual manner.
To protect, to charm.
It is recommended with confidence for your valuable machine.
How do we balance the conflicting themes of "cooling efficiency" and "protection performance"?
Pebbles and debris rolled up from the front tires, insects flying at the lights...etc. These things can damage the radiator core, which is made of aluminum fins.
When the fins are crushed, the cooling effect is lost, and in some cases, the water line may be damaged, causing a coolant leak...
■Features made by Etching Factory
Etching Factory's radiator core guard has been tested many times, mainly in the midsummer 8-hour endurance road race, which can be said to be the most severe on the radiator.
The placement of the mesh pattern, the thickness of the mesh lines, and the aperture ratio are all based on feedback from the racing scene.
Fine mesh pattern in the center and coarse mesh pattern on both sides.
This ensures that pebbles and debris spun off from the front tire are guarded by a fine mesh in the center that matches the width of the tire.
The coarse meshes on both sides are designed with an aperture ratio that takes into account the conflicting themes of cooling efficiency and protection.
■There is also a reason for the choice of material.
The mesh line width, which can only be achieved by reducing the plate thickness (strength reduction) in the case of aluminum and titanium, is realized by using stainless steel (SUS304 0.8t) without reducing the strength of the ideal line width.
Based on the above, the core guard is not only an item to maintain the performance of the vehicle, but also has a dress-up effect to show off the beauty of the vehicle in a casual manner.
To protect, to charm.
It is recommended with confidence for your valuable machine.
Caution
*There may be changes in product specifications due to the manufacturer's reasons.
ALSO VIEWED PRODUCTS
Apply Coupon
Image Review
Review detail
/