Check my coupons
Quantity
100% Original
7 Days Warranty
Free Cashback
Net Price
Applicable Models
See All
ZEPHYR1100 99-06
ZEPHYR1100RS 99-02
GPZ900R 98-03
W800 11-16
W800STREET 19-23
ZEPHYR750 99-03
ZEPHYR750RS 01-02
ZRX 98-08
ZRX-2 98-08
Show more
Product Detail
Specification:
Recommended grip length: Through grip 123mm (2-4mm longer grip recomm ended for non-through grips)
[Description]
Throttle sleeve without protrusions that interfere with grip replacement.
By replacing the ribs at the same time as replacing the grips with custom grips, you can save time by eliminating the need to shave the ribs.
Compatible grips are through-grip 123mm.
If non-through grips are used, 2-4mm longer grips are recomm ended.
Since this is a universal product, please measure the stock throttle sleeve and purchase one with a throttle wire take-up diameter close to that of the stock.
By replacing the ribs at the same time as replacing the grips with custom grips, you can save time by eliminating the need to shave the ribs.
Compatible grips are through-grip 123mm.
If non-through grips are used, 2-4mm longer grips are recomm ended.
Since this is a universal product, please measure the stock throttle sleeve and purchase one with a throttle wire take-up diameter close to that of the stock.
Caution
*The dimensions shown are for design purposes only.The above values may be slightly different depending on the individual manufacturing process.
*Machining may be required depending on the model and grips used.
*Clearance and throttle position are different from stock.
*The outer diameter of the grip mounting area is approx. 0.2mm smaller than that of the stock parts of each manufacturer measured.Therefore, the stock grips may not be usable depending on the model.
*We recommend applying a small amount of grease to the outer circumference of the handlebar to eliminate contact noise with the handlebar when idling and to improve throttle operation.
*There is no grip baffle.When installing, use optional GripBond (Part No.: 93129/96484) and fix it securely by wiring.
*Winding diameter may differ from that of the stock for some reference compatible models.No problem in use.
*HOTGRIP Heavy Duty Built-In 4SN (part number: 10154) Mountable.Slight cutting may be required depending on the individual manufacturing process.
*There may be changes in product specifications due to the manufacturer's reasons.
*Machining may be required depending on the model and grips used.
*Clearance and throttle position are different from stock.
*The outer diameter of the grip mounting area is approx. 0.2mm smaller than that of the stock parts of each manufacturer measured.Therefore, the stock grips may not be usable depending on the model.
*We recommend applying a small amount of grease to the outer circumference of the handlebar to eliminate contact noise with the handlebar when idling and to improve throttle operation.
*There is no grip baffle.When installing, use optional GripBond (Part No.: 93129/96484) and fix it securely by wiring.
*Winding diameter may differ from that of the stock for some reference compatible models.No problem in use.
*HOTGRIP Heavy Duty Built-In 4SN (part number: 10154) Mountable.Slight cutting may be required depending on the individual manufacturing process.
*There may be changes in product specifications due to the manufacturer's reasons.
Applicable Models
ZEPHYR1100 99-06
ZEPHYR1100RS 99-02
GPZ900R 98-03
W800 11-16
W800STREET 19-23
ZEPHYR750 99-03
ZEPHYR750RS 01-02
ZRX 98-08
ZRX-2 98-08
Show more