Φ30 Front Fork Kit (Type1 / Wide / Drum Brake)

  • Product number: 06-01-0095
    • IN STOCK
    • Out Stock

Rp13,223,000

*VAT 11% included

Webike Points: +132,230 Points

Delivery information

  • Please wait...
to Jakarta, South Jakarta, Cilandak
CHANGE
Select address
Shipping Fee Rp120,000
Check my coupons

Quantity

100% Original 7 Days Warranty Free Cashback Net Price

Product Detail

Specification:

Fork pitch: 198mm
Wheel Mounting Width: 160mm
Steering lock bracket included
Applicable wheel: 10 inches, or SP Takegawa 12 inches
Fork oil quantity: 128cc
Fork oil viscosity: #15

[Description]

This is a wide stem version of the Φ30 upright front fork kit (60mm offset) that extends the wheelbase and enhances the front ground feel even with the big torque from the large displacement engine.
The wide stem enables the front wheel to be fitted with a rim width of 3.5J.

Φ30 front fork (type 1) (fork pitch 198mm)
The original front fork with inner tube diameter of Φ30 has a free valve type damping force generation mechanism that improves stroke stability and reduces shock applied to the front during rebound.
In addition, the use of DU metal greatly improves operability, and the structure has high potential for racing use as well.

Top bridge, steering stem
It is manufactured with high precision by machining aluminum, and its surface is silver anodized to improve corrosion resistance.
For the 60mm offset type steering stem, the plate thickness was changed from 20mm to 30mm to increase rigidity, and the screw fixing bolts were changed from two M8 bolts to four M6 bolts.
The lightweight design is also achieved by cutting out the wall while increasing the rigidity.
A steering lock bracket is included so that the stock steering lock can be used without modification.
Those who are currently using SP Takegawa's oil cooler bracket and meter bracket, which are fixed to the steering stem, can also use them as they are.

Stock drum brake specification
The Monkey / Gorilla Stock drum brake hub and brake panel are used as they are, and a Φ30 upright fork can be installed at a reasonable price.
The front disc brake kit (06-08-0029) can be purchased after purchase to upgrade to disc brakes.
Furthermore, it is possible to use disc rotors as they are and step up to brembo 4P calipers.
Includes forged aluminum brake arms that provide braking power with a lighter touch compared to stock bikes.
Surface treatment is buffed and polished.

[Parts purchased separately]
Please purchase the universal headlight and bracket kit 05-08-0355 (for wide).
Blinker bracket for Φ30 upright fork Part No. 05-08-0003
This blinker bracket can be used for both OEM blinkers and SP Takegawa's custom blinkers.
SP Takegawa Front Fender must be purchased separately.
If you are a Monkey or if you are a Gorilla and do not use the OEM handlebars, you will need to purchase the handlebar pipe separately.
■The following parts are required for bikes with frame No. Z50J-1300017-1510400.
Centrifugal clutch wheel: Combination switch assembly. 02-01-015
A clutch lever is required.
Parts to be purchased vary depending on clutch specifications.
・bikes equipped with SP Takegawa special clutch/dry clutch
Standard clutch lever assembly (black) 02-01-028
*There is also a silver type and a quick clutch lever.

・Stock manual clutch / SP Takegawa reinforced manual clutch
Standard Clutch & Clutch Cable Set
(Black/710mm) 02-01-0281
*Other silver type and quick clutch lever, cable length 1060mm are also available

It is necessary to change to SP Takegawa 10 inches wheels or SP Takegawa 12 inch wheels.
SP Takegawa designated 10 inches aluminum wheels (tube type)
Chemical polish (2.5J: 06-09-033 / 3.5J: 06-09-0223)
Blue Black (2.5J: 06-09-054 / 3.5J: 06-09-056)
Black (2.5J: 06-09-0217 / 3.5J: 06-09-0224)

SP Takegawa 12 inch aluminum wheels (tube type) front/rear set (06-09-0216)
Designation MAXXIS 12 inch flat tires (06-09-0222)
Since the stock front fender cannot be installed, the front fender for the 10 inch wide stem made by SP Takegawa must be purchased separately.

Caution

*Since the stock front fender cannot be installed, the front fender for 10 inches wide stem made by SP Takegawa must be purchased separately.
*It can be mounted on SP Takegawa's 12 inches wheels, but the tires that can be used are limited to the MAXXIS 12 inches flat tires sold by SP Takegawa.
*SP Takegawa's Initial Adjuster Kit (06-06-0001/06-06-0002) for Φ30 front fork cannot be installed on Φ30 front fork (type 1).
*Depending on the lot, the product may be delivered with the old price and label with the old JAN code before the price change.
*There may be changes in product specifications due to the manufacturer's reasons.

ALSO VIEWED PRODUCTS

PRODUCT READY TO SHIP

Recommend for You

BEST SELLING

MOST VIEWED PRODUCTS

See all

New Custom Article

See all