Check my coupons
Product Detail
Specification:
[Low-down type] Approx. 20mm
[Spring Part No.] 1357
[Fork oil count / oil level] -
[Preload adjustment] 4th step
[Sag value] 35mm
[Compression adjustment] No adjustment
[Rebound adjustment] No adjustment
[Spring Part No.] 1357
[Fork oil count / oil level] -
[Preload adjustment] 4th step
[Sag value] 35mm
[Compression adjustment] No adjustment
[Rebound adjustment] No adjustment
[Description]
■Rear Spring
Hyperpro's unique low down spring that lowers the vehicle height by changing the rate and adjusting the oil level without changing the free length of the spring.
Enjoy the smooth ride of the Constant Rising Rate, which flexibly absorbs impact and holds firm at the back.
Hyperpro's unique low down spring that lowers the vehicle height by changing the rate and adjusting the oil level without changing the free length of the spring.
Enjoy the smooth ride of the Constant Rising Rate, which flexibly absorbs impact and holds firm at the back.
Note
* The image is only for reference. The image shown may differ from the actual product.
Caution
*If the bike is lowered by more than 30mm, a short side stand may be required depending on the condition of the bike.If your vehicle is equipped with a preload adjuster, adjust the lowering to a level where the side stand can be used.
*When using the side stand, stop the vehicle on a level surface in first gear.(Because of the lowering, the body will be raised more than stock)
*After installation, the balance of the vehicle body will be greatly changed.Be sure to to set the front and rear settings before riding.
*The product in the image may differ from the actual product.
*The image may include other products.
*There may be changes in product specifications due to the manufacturer's reasons.
*When using the side stand, stop the vehicle on a level surface in first gear.(Because of the lowering, the body will be raised more than stock)
*After installation, the balance of the vehicle body will be greatly changed.Be sure to to set the front and rear settings before riding.
*The product in the image may differ from the actual product.
*The image may include other products.
*There may be changes in product specifications due to the manufacturer's reasons.
