Check my coupons
Product Detail
Specification:
[Color] Silver
[Set components]
・Left and right 1 set
・Mounting bolts
[Specification]
・Compatible with stock side cover
・No drilling required
[Set components]
・Left and right 1 set
・Mounting bolts
[Specification]
・Compatible with stock side cover
・No drilling required
[Description]
Hold Plate Bridge type (Duralumin plate)
This model has an additional connecting shaft for easy universal use with home-made mudguards.
■Custom to enhance hold functionality
To improve the holding performance, attach the "Holding Plate Rubber (HP-08R)" to the holding plate with double-sided tape or the like to the desired thickness.
The thickness of each sheet is 8mm.
When attaching the first piece to the hold plate, use Velcro to make it easier to adjust.
The width is 50mm, so it is easier to apply the Velcro tape if you buy it with the width 50mm x length 100mm.
This model has an additional connecting shaft for easy universal use with home-made mudguards.
■Custom to enhance hold functionality
To improve the holding performance, attach the "Holding Plate Rubber (HP-08R)" to the holding plate with double-sided tape or the like to the desired thickness.
The thickness of each sheet is 8mm.
When attaching the first piece to the hold plate, use Velcro to make it easier to adjust.
The width is 50mm, so it is easier to apply the Velcro tape if you buy it with the width 50mm x length 100mm.
Caution
*This product cannot be installed on vehicles with brackets cut off from the frame.
*Set of main aluminum plates (rubbers not included).
*This cannot be used with stock tool box.
*It seems that there are various types of SR400/500 depending on the year, such as weld marks of frame reinforcement on the surface or on the back of the frame.If you have a vehicle with a raised weld, you can install it by shaving a little bit of the hold plate where it may contact.The only bikes that VeloRider has seen with severe weld marks are the very early models.It is possible that a crack may have appeared and was later corrected.
*Images may contain other products.
*There may be changes in product specifications due to the manufacturer's reasons.
*Set of main aluminum plates (rubbers not included).
*This cannot be used with stock tool box.
*It seems that there are various types of SR400/500 depending on the year, such as weld marks of frame reinforcement on the surface or on the back of the frame.If you have a vehicle with a raised weld, you can install it by shaving a little bit of the hold plate where it may contact.The only bikes that VeloRider has seen with severe weld marks are the very early models.It is possible that a crack may have appeared and was later corrected.
*Images may contain other products.
*There may be changes in product specifications due to the manufacturer's reasons.
