Check my coupons
Product Detail
Specification:
Rated voltage] DC12V
Input power]28W
Color Temperature]6000K
Input power]28W
Color Temperature]6000K
[Description]
■Brightness beyond HID and further power saving
The input power is 28W and the color temperature is 6000K.
As a rough guide of the brightness, it is equal or more than the brightness compared with 35W 6000K HID.
■Bright and quick lighting!
Unlike HID, it lights up with full power immediately after power-on.
Also, the color of the light does not change gradually like HID.
■Battery-friendly automatic light reduction system adopted!
Equipped with dimmer sensor (automatic light control system) and REV sensor (engine rotation sensor RSE-01).
It automatically reduces the amount of light emitted by the LED in response to the ambient brightness during the day, so it functions as a daylight during the day and lights up at night with 28W full power.(The difference from the attenuated state is 5 times.)
In addition, by connecting the REV sensor (engine revolution signal sensor RSE-01), the light will be dimmed even when idling at a standstill, reducing the heat generated by the LED and the burden on the battery.
The light is not suddenly reduced to 1/5 brightness, but gradually reduced.
■Forced air cooling type by riding wind
This product is designed to forcibly cool down the heat generated by the LED by exposing the entire unit to the running wind.
For example, at a speed of 36 km/h, a 10 mph wind cools the car, so it generates almost no heat while riding.
When the vehicle is stopped, the light is reduced by 1/5 due to the REV sensor (engine rotation sensor), so it hardly generates heat.
■You can add more handsets!
By connecting the optional child unit (without REV sensor), the unit can be installed on both sides of the vehicle.
■High quality die-cast body
The body is made of high quality die-cast.
■Four types of directional mounting bolts to choose from
This product has four types of mounting bolt directional variations to accommodate various installation situations for each vehicle, where the direction of the dimmer sensor and wiring is specified.
○The fog light switch must be marked to indicate fog lights.
We have prepared various sizes of fog light marks, so please print them on sticker labels and paste them near the fog light switch.
The input power is 28W and the color temperature is 6000K.
As a rough guide of the brightness, it is equal or more than the brightness compared with 35W 6000K HID.
■Bright and quick lighting!
Unlike HID, it lights up with full power immediately after power-on.
Also, the color of the light does not change gradually like HID.
■Battery-friendly automatic light reduction system adopted!
Equipped with dimmer sensor (automatic light control system) and REV sensor (engine rotation sensor RSE-01).
It automatically reduces the amount of light emitted by the LED in response to the ambient brightness during the day, so it functions as a daylight during the day and lights up at night with 28W full power.(The difference from the attenuated state is 5 times.)
In addition, by connecting the REV sensor (engine revolution signal sensor RSE-01), the light will be dimmed even when idling at a standstill, reducing the heat generated by the LED and the burden on the battery.
The light is not suddenly reduced to 1/5 brightness, but gradually reduced.
■Forced air cooling type by riding wind
This product is designed to forcibly cool down the heat generated by the LED by exposing the entire unit to the running wind.
For example, at a speed of 36 km/h, a 10 mph wind cools the car, so it generates almost no heat while riding.
When the vehicle is stopped, the light is reduced by 1/5 due to the REV sensor (engine rotation sensor), so it hardly generates heat.
■You can add more handsets!
By connecting the optional child unit (without REV sensor), the unit can be installed on both sides of the vehicle.
■High quality die-cast body
The body is made of high quality die-cast.
■Four types of directional mounting bolts to choose from
This product has four types of mounting bolt directional variations to accommodate various installation situations for each vehicle, where the direction of the dimmer sensor and wiring is specified.
○The fog light switch must be marked to indicate fog lights.
We have prepared various sizes of fog light marks, so please print them on sticker labels and paste them near the fog light switch.
Caution
*Install the product correctly according to the instruction manual.Improper installation may result in fire or equipment damage.
*Please be careful when handling this product.Improper handling may cause burns or other serious accidents that may result in death.In addition, sparks, poor insulation, or short-circuiting may cause a failure of the product or a fire in the vehicle.
*This product is a precision instrument, so do not drop it or pull the wiring forcibly.There is a risk of malfunction, injury or burn due to electric shock, or serious accidents involving human life.
*Do not disassemble or modify this product in any way.Failure to do so may result in a vehicle fire or accident.The warranty does not apply to products that have been disassembled or modified.
*If any damage is found to the product before or during installation, immediately stop the installation work.
*This product is for 12v DC only.Be sure to use DC12V as the power source for wiring.
*Please do not connect to the headlight wiring of AC-powered vehicles, which is common in small displacement vehicles.When using an AC power supply, an AC-DC conversion adapter (sold separately) is required.
*Depending on the power generation capacity of the vehicle's generator, there is a risk of battery failure.Please charge the battery regularly.Also, by taking measures such as lowering the power consumption of the headlight bulb, you can reduce the overall power consumption and avoid problems.
*These products generate heat due to their characteristics.When installing, be sure to install it so that it is exposed to the wind when riding.Also, after installing this product, periodically retighten it to make sure that it is securely installed.
*Please be sure to connect the attached RSE-01 unit before use, as the light is dimmed to reduce heat generation when the vehicle is stopped.
*This product is designed to be installed in a specific direction.Be sure to install the unit so that the dimmer sensor is facing up and the wiring is facing down.
*This product is waterproofed for daily life, but it is recommended to apply caulking agent to the base of the wiring coming out of the light body.
*When washing a vehicle with a high pressure washer, please do not let the high pressure wash directly hit this product.
*If you feel any abnormality while using this product, please contact the dealer where you purchased it or Protec Service Section.
*Do not look directly at the LED light when it is on.It can cause visual impairment.
*The plating may peel off if it is left for a long time with moisture on the plated part while the body is hot.Be sure to wipe off any moisture that may have adhered to the product before use.
*Please do not drop, scratch, or apply excessive force to the LED light body.It not only causes breakage, deterioration of performance and shortening of service life, but also causes injury.
*Do not light near flammable or inflammable materials such as paper, cloth, gasoline, flammable spray, thinner, etc.
*Please adjust the optical axis before use.It may obstruct the view of oncoming vehicles and cause traffic accidents.
*PROTEC is not responsible for any damage or accident caused by the use of this product.
*Protec is not responsible for any labor charges for removal or other expenses incurred during repair.
*Install it below the center of the headlight.
*The illumination must be below the optical axis of the headlight.
*Do not turn on more than 3 fog lights at the same time.
*Install a switch that can be turned on and off independently.
*The mounting position must be between 25cm and 80cm from the ground.
*The image contains other types.
*There may be changes in product specifications due to the manufacturer's reasons.
*Please be careful when handling this product.Improper handling may cause burns or other serious accidents that may result in death.In addition, sparks, poor insulation, or short-circuiting may cause a failure of the product or a fire in the vehicle.
*This product is a precision instrument, so do not drop it or pull the wiring forcibly.There is a risk of malfunction, injury or burn due to electric shock, or serious accidents involving human life.
*Do not disassemble or modify this product in any way.Failure to do so may result in a vehicle fire or accident.The warranty does not apply to products that have been disassembled or modified.
*If any damage is found to the product before or during installation, immediately stop the installation work.
*This product is for 12v DC only.Be sure to use DC12V as the power source for wiring.
*Please do not connect to the headlight wiring of AC-powered vehicles, which is common in small displacement vehicles.When using an AC power supply, an AC-DC conversion adapter (sold separately) is required.
*Depending on the power generation capacity of the vehicle's generator, there is a risk of battery failure.Please charge the battery regularly.Also, by taking measures such as lowering the power consumption of the headlight bulb, you can reduce the overall power consumption and avoid problems.
*These products generate heat due to their characteristics.When installing, be sure to install it so that it is exposed to the wind when riding.Also, after installing this product, periodically retighten it to make sure that it is securely installed.
*Please be sure to connect the attached RSE-01 unit before use, as the light is dimmed to reduce heat generation when the vehicle is stopped.
*This product is designed to be installed in a specific direction.Be sure to install the unit so that the dimmer sensor is facing up and the wiring is facing down.
*This product is waterproofed for daily life, but it is recommended to apply caulking agent to the base of the wiring coming out of the light body.
*When washing a vehicle with a high pressure washer, please do not let the high pressure wash directly hit this product.
*If you feel any abnormality while using this product, please contact the dealer where you purchased it or Protec Service Section.
*Do not look directly at the LED light when it is on.It can cause visual impairment.
*The plating may peel off if it is left for a long time with moisture on the plated part while the body is hot.Be sure to wipe off any moisture that may have adhered to the product before use.
*Please do not drop, scratch, or apply excessive force to the LED light body.It not only causes breakage, deterioration of performance and shortening of service life, but also causes injury.
*Do not light near flammable or inflammable materials such as paper, cloth, gasoline, flammable spray, thinner, etc.
*Please adjust the optical axis before use.It may obstruct the view of oncoming vehicles and cause traffic accidents.
*PROTEC is not responsible for any damage or accident caused by the use of this product.
*Protec is not responsible for any labor charges for removal or other expenses incurred during repair.
*Install it below the center of the headlight.
*The illumination must be below the optical axis of the headlight.
*Do not turn on more than 3 fog lights at the same time.
*Install a switch that can be turned on and off independently.
*The mounting position must be between 25cm and 80cm from the ground.
*The image contains other types.
*There may be changes in product specifications due to the manufacturer's reasons.
