Check my coupons
Product Detail
Specification:
Material / Surface treatmentAluminum
[Components]
・Special brake rod
・Special axle shafts, nuts
[Components]
・Special brake rod
・Special axle shafts, nuts
[Description]
Swingarm with triple square middle (60mm x 25mm pipe)
A back-pull type chain puller has been adopted to improve serviceability.
The pivot part is a bearing specification as a standard setting.
This product comes standard with interchangeable chain sliders (upper and lower)
A back-pull type chain puller has been adopted to improve serviceability.
The pivot part is a bearing specification as a standard setting.
This product comes standard with interchangeable chain sliders (upper and lower)
Note
* This product will be made after an order, We will notice currect shipping time after we recieve an order.
Caution
*For disc brakes, the length of the brake stopper must be 25mm from the tip.
*Fits up to 8 inch 4.0J, 10 inch 4.0J.(+4cm or more is required for 10 inch) When installing, G-Craft 7mm offset sprockets on the front and G-Craft 8mm sprocket spacers (or wide rear disc hub) on the rear are required.
*The rear shock is attached in the shape of "C", but there is no problem in use.
*The brake switch bracket may interfere with the brake switch due to individual differences in the bike body.In this case, the brake switch bracket must be bent to provide the necessary clearance for operation before installation.
*Other types and products may be included in the image.
*There may be changes in product specifications due to the manufacturer's reasons.
*Fits up to 8 inch 4.0J, 10 inch 4.0J.(+4cm or more is required for 10 inch) When installing, G-Craft 7mm offset sprockets on the front and G-Craft 8mm sprocket spacers (or wide rear disc hub) on the rear are required.
*The rear shock is attached in the shape of "C", but there is no problem in use.
*The brake switch bracket may interfere with the brake switch due to individual differences in the bike body.In this case, the brake switch bracket must be bent to provide the necessary clearance for operation before installation.
*Other types and products may be included in the image.
*There may be changes in product specifications due to the manufacturer's reasons.
