- Home
- Model
- KAWASAKI 1001cc -
- ZRX1200R
- Motorcycle Parts
- Handles & Control Parts
- Controls
- Steering
- antlion
- antlion: Top Bridge
Check my coupons
Product Detail
Specification:
Mill Type
Clamp travel: 6 mm front and rear
[Components]
・Stainless Steel Cap Bolt (M10 x 25) x 2 (pcs)
・Stainless Steel Cap Bolt (M8 x 30) x 2 (pcs)
・Stainless Steel Cap Bolt (M8 x 20) x 4 (pcs)
・Stainless Steel Cap Bolt (M6 x 70) x 2 (pcs)
・Aluminum collar (43mm x 2.45mm x 2) x 4 (pcs)
・Handle Clamp x 2 (Set)
・Top bridge x 1 (pcs)
・Meter bracket x 1 (piece)
Clamp travel: 6 mm front and rear
[Components]
・Stainless Steel Cap Bolt (M10 x 25) x 2 (pcs)
・Stainless Steel Cap Bolt (M8 x 30) x 2 (pcs)
・Stainless Steel Cap Bolt (M8 x 20) x 4 (pcs)
・Stainless Steel Cap Bolt (M6 x 70) x 2 (pcs)
・Aluminum collar (43mm x 2.45mm x 2) x 4 (pcs)
・Handle Clamp x 2 (Set)
・Top bridge x 1 (pcs)
・Meter bracket x 1 (piece)
[Description]
The massive top bridge has been made lighter and more rigid by utilizing the know-how gained over the years.
The material used is 2000 series super duralumin, which is also used in aircraft, and it is carefully machined from a solid block to provide high precision and texture.
In addition, the design that tightens the front area is also applied with consideration for the safety of the rider, and the surface of the top bridge is finely cut so that the light is diffusely reflected.
Of course you can lock the handlebars, and you can adjust the position of the handlebar clamps to reduce the discomfort of the riding position.
B.N clamp is standard equipment for both mill type and Nazca type.
Mill type: Flat upper surface with cutting blade marks
Nasca type to Mill type with pocket processing
The material used is 2000 series super duralumin, which is also used in aircraft, and it is carefully machined from a solid block to provide high precision and texture.
In addition, the design that tightens the front area is also applied with consideration for the safety of the rider, and the surface of the top bridge is finely cut so that the light is diffusely reflected.
Of course you can lock the handlebars, and you can adjust the position of the handlebar clamps to reduce the discomfort of the riding position.
B.N clamp is standard equipment for both mill type and Nazca type.
Mill type: Flat upper surface with cutting blade marks
Nasca type to Mill type with pocket processing
Note
* The image is only for reference. The image shown may differ from the actual product.
Caution
*All bolts are preassembled.
*There may be changes in product specifications due to the manufacturer's reasons.
*There may be changes in product specifications due to the manufacturer's reasons.
ALSO VIEWED PRODUCTS
Apply Coupon
Image Review
Review detail
/