Check my coupons
Quantity
100% Original
7 Days Warranty
Free Cashback
Net Price
Applicable Models
See All
Zephyr 1100 92-07
Product Detail
Specification:
Type: EZ-FIT
Material: Aluminum
Processing: Switch hole machined
Size: Travel 7mm UP / 8mm BACK
Outer Diameter: Φ22.2
Inner diameter: Φ14.0
dimension
・Vertical stock ratio: 7
・Front to rear stock ratio: 8
・Width: 690
・Height: 71
・Pull: 129
・Aperture angle: 28
・Standing angle: 73
Material: Aluminum
Processing: Switch hole machined
Size: Travel 7mm UP / 8mm BACK
Outer Diameter: Φ22.2
Inner diameter: Φ14.0
dimension
・Vertical stock ratio: 7
・Front to rear stock ratio: 8
・Width: 690
・Height: 71
・Pull: 129
・Aperture angle: 28
・Standing angle: 73
[Description]
Specially designed for models with a comfortable position by moving it forward about 10mm compared to the normal position.
The design is based on the stock handlebar shape, but the grip part has been shifted in parallel.
The angle is the same as the stock one, so you can form a good riding position without damaging the image.
■No need to replace cables
It is designed for exclusive use of the model, so you don't have to worry about compatibility.
■Switch hole pre-machined
You no longer need to worry about positioning and preparing tools, and you no longer need to spend extra money.
■Shift the lever holder to the left or right
The mounting straight line is designed to be about 5mm longer.
The grip position of the lever can be fine-tuned.
The design is based on the stock handlebar shape, but the grip part has been shifted in parallel.
The angle is the same as the stock one, so you can form a good riding position without damaging the image.
■No need to replace cables
It is designed for exclusive use of the model, so you don't have to worry about compatibility.
■Switch hole pre-machined
You no longer need to worry about positioning and preparing tools, and you no longer need to spend extra money.
■Shift the lever holder to the left or right
The mounting straight line is designed to be about 5mm longer.
The grip position of the lever can be fine-tuned.
Note
* The image is only for reference. The image shown may differ from the actual product.
Caution
*The bar ends are not included in the product.Separately for inner diameter 14Φ (Recommended: EFFEX Handlebar Weights / *W650 excluded) handlebar ends are required.(Stock bar ends cannot be used.)
*Depending on the model, it may be necessary to change the minimum cable routing.
*The cables may need to be replaced separately.
*Some models may not have a switch hole.
*There may be changes in product specifications due to the manufacturer's reasons.
*Depending on the model, it may be necessary to change the minimum cable routing.
*The cables may need to be replaced separately.
*Some models may not have a switch hole.
*There may be changes in product specifications due to the manufacturer's reasons.
Applicable Models
Zephyr 1100 92-07
