- Home
- Model
- HONDA 51 - 125cc
- APE100
- Motorcycle Parts
- Frames / Protections
- Stand Spools
- BATTLE FACTORY
- BATTLE FACTORY: Rear Stand Set Caliper Fork Type for 12-inches
Rear Stand Set Caliper Fork Type for 12-inches
- Product number: BA00-046-03W
-
- IN STOCK
- Out Stock
- BATTLE FACTORY
- |
- 0.0
- (0 review)
Check my coupons
Product Detail
Specification:
Color: White
Size: For 12 inch
Stand Weight: 1.2kg
[Set components]
・BA00-046: Rear Stand 12inch Crab Hook Type
・BA00-0461W: Adjusting plate 2pcs
・BA00-0463R: Crab Plate WHITE 2pcs
・BCB06-010-W: M6 x 10 Button Cap Bolt 1pc
・BCB06-020-W: M6 x 10 Button Cap Bolt 2pcs
Size: For 12 inch
Stand Weight: 1.2kg
[Set components]
・BA00-046: Rear Stand 12inch Crab Hook Type
・BA00-0461W: Adjusting plate 2pcs
・BA00-0463R: Crab Plate WHITE 2pcs
・BCB06-010-W: M6 x 10 Button Cap Bolt 1pc
・BCB06-020-W: M6 x 10 Button Cap Bolt 2pcs
[Description]
Easy bolt-on installation.
[installation instructions]
Remove the stock adjusting plate and replace it with the included adjusting plate.
Tighten the button cap bolt in the middle of the plate to hold the swingarm.Or, crush the thread in the middle of the crab plate, drill a 6mm hole in the swingarm, and tighten the bolt through the swingarm.
The adjusting plate is threaded with 6mm screws, so it can be tightened as it is.
[installation instructions]
Remove the stock adjusting plate and replace it with the included adjusting plate.
Tighten the button cap bolt in the middle of the plate to hold the swingarm.Or, crush the thread in the middle of the crab plate, drill a 6mm hole in the swingarm, and tighten the bolt through the swingarm.
The adjusting plate is threaded with 6mm screws, so it can be tightened as it is.
Note
Other types are here.
Caution
*The hook part is red anodized aluminum
*Photo is for reference only.
*Photo is for reference only.
Applicable Models
ALSO VIEWED PRODUCTS
Apply Coupon
Image Review
Review detail
/