- Home
- Tools
- Maintenance Accessory
- amon
- amon: Flat LED
Check my coupons
Quantity
100% Original
7 Days Warranty
Free Cashback
Net Price
Product Detail
Specification:
DC12V only, 1 LED light
[Color]
White: 8000 Kelvin (color temperature)
[Current consumption]
20mA
[lens cover size]
Width 19.5 x Height 30 x Thickness 8mm
[cord thickening]
Equivalent to 0.2sq
[length of cord]
200mm [Material]
Body / ABS, Lens / Acrylic, Cord / Conductor: Soft copper wire for electric use, Insulation coating: PVC, Double-sided tape / Base material: Foamed polyethylene, Adhesive: Acrylic adhesive
[Components]
Dedicated lens cover, double-sided tape
[Quantity]
1 set
[Color]
White: 8000 Kelvin (color temperature)
[Current consumption]
20mA
[lens cover size]
Width 19.5 x Height 30 x Thickness 8mm
[cord thickening]
Equivalent to 0.2sq
[length of cord]
200mm [Material]
Body / ABS, Lens / Acrylic, Cord / Conductor: Soft copper wire for electric use, Insulation coating: PVC, Double-sided tape / Base material: Foamed polyethylene, Adhesive: Acrylic adhesive
[Components]
Dedicated lens cover, double-sided tape
[Quantity]
1 set
[Description]
●Addition or replacement of indoor lighting
●Thin and bright flat LED
[Installation Instructions]
1. Remove the negative terminal of the battery for safety.
2. Connect the red cord to the positive (e.g. ACC power).
3. Connect the black cord to the negative (e.g. body ground).
4. Install the negative terminal of the battery.
[How to install the lens cover]
1. Place the flat LED into the lens cover.
2. Push the flat LED into the lens cover until you hear a crack.
3. Remove dirt and oil from the flat LED, and apply double-sided tape and crimp it.
4. Remove dirt and oil from the installation area and firmly crimp and fix it.
●Thin and bright flat LED
[Installation Instructions]
1. Remove the negative terminal of the battery for safety.
2. Connect the red cord to the positive (e.g. ACC power).
3. Connect the black cord to the negative (e.g. body ground).
4. Install the negative terminal of the battery.
[How to install the lens cover]
1. Place the flat LED into the lens cover.
2. Push the flat LED into the lens cover until you hear a crack.
3. Remove dirt and oil from the flat LED, and apply double-sided tape and crimp it.
4. Remove dirt and oil from the installation area and firmly crimp and fix it.
Caution
*Before use, please read the instructions on the back of the package.*
ALSO VIEWED PRODUCTS
Apply Coupon
Image Review
Review detail
/