- Home
- Model
- HONDA 1001cc -
- CB1100
- Motorcycle Parts
- Brakes
- Torque Rod
- METAL GEAR WORKS
- METAL GEAR WORKS: Rear Brake Torque Rod
Rear Brake Torque Rod
- Product number: 02-0101-070001
-
- IN STOCK
- Out Stock
- METAL GEAR WORKS
- |
- 3.0
- (1 reviews)
Check my coupons
Product Detail
Specification:
Material: Titanium
Instruction manual included
Instruction manual included
[Description]
The rear brake torque rod was made by titanium.
The rod section is offset to allow the installation of 150 size tires (actual measurement: 150mm).
Comes with an instruction manual.
In case of CB750F stock swingarm, the clearance between the swingarm and the rod is about 6.5mm while the actual tire width is 150mm.
In the case of the CB1100F stock swingarm, the actual tire width is 150mm and the clearance with the rod is approx. 4mm.
The rod section is offset to allow the installation of 150 size tires (actual measurement: 150mm).
Comes with an instruction manual.
In case of CB750F stock swingarm, the clearance between the swingarm and the rod is about 6.5mm while the actual tire width is 150mm.
In the case of the CB1100F stock swingarm, the actual tire width is 150mm and the clearance with the rod is approx. 4mm.
Note
* The image is only for reference. The image shown may differ from the actual product.
Caution
*Not available for CB1100R due to different shape.
Applicable Models
ALSO VIEWED PRODUCTS
Apply Coupon
Image Review
Review detail
/