HONDA NSR250R
- 22/06/2016
114 views
Model Name:NSR250R
Manufacturer:HONDA
Model Year:1986
It was developed at the same time as the commercially sold racer model, RS250. The NS cylinders that were placed in V-shape at 90 degrees had RC valves. It was so popular that the mountain roads used to be full of this NSR.
Specifications:
[Basic spec]
Manufacturer | HONDA | Engine Type | Water-Cooled 2 Cycle Crankcase Reed Valve 90-degrees V-Shaped 2 Cylinder |
---|---|---|---|
Model Name | NSR250R | Starter | Kick Starter |
Grade | – | Maximum Output (ps) | 45ps(33kw)/9500rpm |
Drive Train | – | Maximum Torque (kgf/m) | 3.6kg-m(35.3N-m)/8500rpm |
Model Type | MC16 | Curb Weight | 141 |
Displacement | 249 | Dry Weight | 125 |
Sales Launch Year | 1986/0 | Fuel Efficiency by Catalog | 41.0km/L (at 50km/h) |
Height/Width/Length | 1105/135/2035 | Fuel Tank Capacity | 16 |
Seat Height | 750 | Distance to Empty | – |
Front Tire Indication | 100/80-17 52H TL | Fuel Supply | Carburetor |
Rear Tire Indication | 130/70-18 63H TL |
[Service data]
Standard Plug | B9ECS | Chain Size | 520 |
---|---|---|---|
Number of Used Plugs | 2 | Chain Link Number | 108 |
Engine Oil Amount | – | Battery Code | FT4L-BS |
Engine Oil (Refill) | 0.7L | Headlight | 12V 60w/55w |
Engine Oil (Element Replacement) | – | Headlight Type | H4 |
Front Blinker Rating | 12V 15w | Headlight Remarks | – |
Drive Sprocket Teeth Number | 15 | Tail Light Rating | 12V 18w/5w |
Driven Sprocket Teeth Number | 42 | Rear Blinker Rating | 12V 15w |
[Machine detail]
Motor Model Code | MC16E | Caster Angle | – |
---|---|---|---|
Bore (mm) | 54 | Trail (mm) | – |
Storke (mm) | 54.5 | Minimum Ground Clearance | 135 |
Compression Ratio | 6.2 | Distance Between Axes | 1360 |
Ignition Method | – | Streering Angle (Right) | – |
Engine Lubrication Type | Separate Lubrication Type (with Splash and Force-Feed) | Turning Angle (Left) | – |
Frame Type | Diamond (Aluminum Twin Tube) | Mirror Screw Hole Diameter | – |
Minimum Rotaion Radius | – | Fuel Tank Reserve Capacity | – |
[Underbody detail]
Front Brake Type | Hydraulic Double Disc | Suspension Type (Rear) | Swing Arm (Pro-link) |
---|---|---|---|
Front Brake Remarks | – | Number of Rear Shock Absorbers | 1 |
Rear Brake Type | Hydraulic Disc | Rear Suspension Stroke | – |
Rear Brake Remarks | – | Rear Wheel Travel | – |
Suspension Type (Front) | Telescopic | ABS | – |
Front Fork Type | Upright Fork | Drive Train | Chain |
Front Suspension Stroke | – | Differential Oil Amount | – |
Front Fork Diameter | – | Chain Remarks | – |
[Equipment]
Seat Lowering Allowance | – | Theft Prevention Device | – |
---|---|---|---|
Mirror Screw Hole Diameter | – | Tail Light Bulb Type | S25 |
Mirror Remarks | Cowl Mirror | Tail Light Base Shape | BAY15D |
Electronic Device Remarks | – | Tail Light Base Shape 2 | – |
Fuel Gauge | Available | Tail Light Remarks | Glass Shape G18 Also Installable |
Clock | Available | Front Blinker Bulb Type | G18 |
Hazard | – | Front Blinker Base Shape | BA15S/BA15S |
[Engine detail]
Clutch Type | Wet Multiple Plate Coil Spring | Tappet Clearance (mm) EX | – |
---|---|---|---|
Transmission | Permanently Engaged 6-Stage Normal Shift | Idling Initial Value (rpm) | – |
Number of Gears | 6 | Needle Steps (Clip Location) | – |
Gear Ratio | – | Float Level (mm) | – |
Primary Reduction Ratio | – | Air Screw Return | – |
Secondary Reduction Ratio | 2.8 | Main Jet Type | KEIHIN Round Large (E) |
Variable Speed Vehicle Gear Ratio | – | Main Jet Number | #110+#115 |
Tappet Clearance (mm) IN | – |
[Other spec]
Clutch Cable Length | – | Rear Brake Cable Length | – |
---|---|---|---|
Choke Cable Length | – | Other Cables | – |
Meter Cable Length | – | Engine Number (Production Launch) | – |
Throttle Cable Length | – | Engine Number (Production End) | – |
Front Brake Cable Length | – |
[See Moto Index of HONDA]
[See Accessories for HONDA NSR250R]