- Home
- Model
- SUZUKI 51 - 125cc
- ADDRESS V100
- Motorcycle Parts
- Engine Parts
- Engine
- Gaskets
- Chameleon Factory
- Chameleon Factory: Head Gasket Spacer
Check my coupons
Product Detail
Specification:
56mm
[Description]
The long stroke crank with special spacer for long stroke engine has larger piston stroke, but half of the stroke length will be above top dead center and half will be below bottom dead center.To put it simply, the piston pops out from the top of the cylinder by half the amount of the stroke increase.This head gasket spacer is designed to compensate for that "sticking out" part.
●Raising the cylinder base surface will help to prevent long stroke, but at the same time, it will raise the position of intake and exhaust ports, which will make the engine look like a failed engine with too many ports.We recommend this spacer to prevent stroke increase.This product is compatible with the Chameleon Factory Megaton Kit
●Raising the cylinder base surface will help to prevent long stroke, but at the same time, it will raise the position of intake and exhaust ports, which will make the engine look like a failed engine with too many ports.We recommend this spacer to prevent stroke increase.This product is compatible with the Chameleon Factory Megaton Kit
Note
This product cannot be used for normal bore cars.
If you are using the Chameleon Factory Megaton head, you can use it with this spacer.
This head gasket spacer is for upper dead center.If you have a long stroke crank, the piston will hit the crank wave in some models.The piston skirt must also be machined.The aluminum spacer has high heat dissipation and looks as if it has one more fin on the cylinder when it is installed, making it very smart.Of course, it is designed for each car.The thickness of the spacer is 2mm.
If you are using the Chameleon Factory Megaton head, you can use it with this spacer.
This head gasket spacer is for upper dead center.If you have a long stroke crank, the piston will hit the crank wave in some models.The piston skirt must also be machined.The aluminum spacer has high heat dissipation and looks as if it has one more fin on the cylinder when it is installed, making it very smart.Of course, it is designed for each car.The thickness of the spacer is 2mm.
Applicable Models
ALSO VIEWED PRODUCTS
Apply Coupon
Image Review
Review detail
/