- Home
- Model
- KAWASAKI 1001cc -
- ZZR1100 (ZX-11)
- Motorcycle Parts
- Brakes
- Banjo Fittings
- K-FACTORY
- K-FACTORY: Banjo Bolt with Relief Valve
Banjo Bolt with Relief Valve
- Product number: 000EZCR005Z
-
- IN STOCK
- Out Stock
- K-FACTORY
- |
- 0.0
- (0 review)
Check my coupons
Product Detail
Specification:
Material: Duralumin machined
With relief valve
With relief valve
[Description]
When using K-FACTORY oil pan for ZZR1100(C type) or GPZ1100 (water cooling)!
The oil pan of "ZZR1100C" and of "GPZ1100 (water-cooling)" has a relief valve.
Since the stock relief valve cannot be installed on the billet oil pan made by K-FACTORY, the banjo bolt with relief valve was made by duralumin.
In order to put the relief valve and the hole for pressure release on the line coming back from the oil cooler, downsizing the relief valve succeeded by integrating the relief valve with the banjo bolt through trial and error and by studying the spring pressure.
This is an optional part for those who use K-FACTORY's billet oil pan for the above two models.
The oil pan of "ZZR1100C" and of "GPZ1100 (water-cooling)" has a relief valve.
Since the stock relief valve cannot be installed on the billet oil pan made by K-FACTORY, the banjo bolt with relief valve was made by duralumin.
In order to put the relief valve and the hole for pressure release on the line coming back from the oil cooler, downsizing the relief valve succeeded by integrating the relief valve with the banjo bolt through trial and error and by studying the spring pressure.
This is an optional part for those who use K-FACTORY's billet oil pan for the above two models.
Caution
*It is confirmed that only ZZR1100C and GPZ1100 (water-cooled) have this relief valve installed on the oil pan, but later models have no relief valve and ZRX1200 has no aperture hole.If using this product for other than these two models, please do so at your own risk.
ALSO VIEWED PRODUCTS
Apply Coupon
Image Review
Review detail
/