Check my coupons
Product Detail
Specification:
[Light color]
6000 kelvin: White
3000 kelvin: Halogen colored bulb
For 12V motorcycle
DC lighting system
Rated voltage: DC12V
Power consumption: Hi Beam 20W/ Low Beam 20W
LED: Cree X Lamp XP-L LEDs
6000 kelvin: White
3000 kelvin: Halogen colored bulb
For 12V motorcycle
DC lighting system
Rated voltage: DC12V
Power consumption: Hi Beam 20W/ Low Beam 20W
LED: Cree X Lamp XP-L LEDs
[Description]
Super Cub C125 Headlight Kit to replace the standard LED headlights.
It is much brighter than the standard LED!
The candela value for low beam measurement is more than 5 times the normal value! (comparison of numerical values when the low beam is lit by Protec.)
Doesn't the standard LED headlight feel dark?
Super Cub/ Cross Cub normal LED headlight Lo beam is lit at 7.8w. If you look at the image that LEDs are brighter than conventional light bulbs, you will be disappointed with the brightness of standard LEDs. Unlike light bulb type headlights, normal LED headlights cannot be replaced with external LEDs to make them brighter. By replacing the headlight unit, this product will make the headlights many times brighter. As a result of Protech measurement, the difference in candela value of Lo beam is more than 5 times!
Clean multi-reflector lens.
The 18 models of Super Cub 110/50 and Cross Cub 110/50 genuine standard LED headlights are multi-reflector type with no cut on the lens surface. Have you ever felt that the LED base, which is arranged in a single horizontal line in the center of the headlight, feels strange when viewed from the front? This product uses the conventional multi-reflector lens and is finished with a neat appearance.
Hi beam is also bright!
Even if you switch to Hi beam, the brightness is different compared to normal LED headlights. When the normal Hi beam is lit, the Lo beam is also lit at the same time. Even if Hi and Lo are lit at the same time, the brightness is very weak compared to Protech products as shown in the image.
Hi beam indicator can be lit!
By removing the normal LED headlights, the Hi beam indicator will not light up, but Protech products can turn on the Hi beam indicator by their own control.
Selectable color temperatures are 6000K and 3000K.
Please choose your favorite color from 2 colors, 6000 Kelvin, which is a pale emission color like LED, and 3000 Kelvin, which reproduces the halogen bulb color more classically.
Waterproof electric fan cooling.
Really bright LEDs generate heat and become hot due to the large input current. To cool the heat, this product uses a highly durable waterproof electric fan cooling method. It is an essential equipment to maintain stable brightness.
Reliable CREE LED adopted!
For the light emitter, CREE XLamp XP-L LEDs are used, 2 on the Hi beam side and 2 on the Lo beam side, for a total of 4 LEDs.
Easy to install!
The tools required for installation are + screwdriver (large, small) and pliers. The method of attaching and detaching the cowl is explained in the manual in an easy-to-understand color image.
It is much brighter than the standard LED!
The candela value for low beam measurement is more than 5 times the normal value! (comparison of numerical values when the low beam is lit by Protec.)
Doesn't the standard LED headlight feel dark?
Super Cub/ Cross Cub normal LED headlight Lo beam is lit at 7.8w. If you look at the image that LEDs are brighter than conventional light bulbs, you will be disappointed with the brightness of standard LEDs. Unlike light bulb type headlights, normal LED headlights cannot be replaced with external LEDs to make them brighter. By replacing the headlight unit, this product will make the headlights many times brighter. As a result of Protech measurement, the difference in candela value of Lo beam is more than 5 times!
Clean multi-reflector lens.
The 18 models of Super Cub 110/50 and Cross Cub 110/50 genuine standard LED headlights are multi-reflector type with no cut on the lens surface. Have you ever felt that the LED base, which is arranged in a single horizontal line in the center of the headlight, feels strange when viewed from the front? This product uses the conventional multi-reflector lens and is finished with a neat appearance.
Hi beam is also bright!
Even if you switch to Hi beam, the brightness is different compared to normal LED headlights. When the normal Hi beam is lit, the Lo beam is also lit at the same time. Even if Hi and Lo are lit at the same time, the brightness is very weak compared to Protech products as shown in the image.
Hi beam indicator can be lit!
By removing the normal LED headlights, the Hi beam indicator will not light up, but Protech products can turn on the Hi beam indicator by their own control.
Selectable color temperatures are 6000K and 3000K.
Please choose your favorite color from 2 colors, 6000 Kelvin, which is a pale emission color like LED, and 3000 Kelvin, which reproduces the halogen bulb color more classically.
Waterproof electric fan cooling.
Really bright LEDs generate heat and become hot due to the large input current. To cool the heat, this product uses a highly durable waterproof electric fan cooling method. It is an essential equipment to maintain stable brightness.
Reliable CREE LED adopted!
For the light emitter, CREE XLamp XP-L LEDs are used, 2 on the Hi beam side and 2 on the Lo beam side, for a total of 4 LEDs.
Easy to install!
The tools required for installation are + screwdriver (large, small) and pliers. The method of attaching and detaching the cowl is explained in the manual in an easy-to-understand color image.
Caution
*Install the product correctly according to the instruction manual.Improper installation may result in fire or equipment damage.
*Before installation, be sure to disconnect the terminal cord on the minus side of the battery and confirm that the key is OFF.
*Please do not touch or get the LED chip dirty.Dirt can cause the LED chip to burn due to heat being built-up.The LED bulb comes with an acrylic cap with a sealing seal.
*Please handle this product with care as it is a precision instrument.Do not drop the product or pull the wires forcibly.Improper handling may cause malfunction, injury, burns, or serious accidents that may result in death.In addition, sparks, poor insulation, or short-circuiting may cause a failure of the product or a fire in the vehicle.
*Do not disassemble or modify this product in any way.Products that have been disassembled or modified are not covered by warranty.
*Do not look directly at the LED light when it is on.It can cause visual impairment.
*Do not splash water on the lens while the light is on or immediately after it is turned off.Sudden temperature change may cause damage to the lens or LED bulb.In addition, please do not touch the LED bulb itself, the heat sink behind it, and the controller unit because they get to the high temperature.
*This product is for motorcycles only, so cannot be used on four-wheeled vehicles.
*Do not cover with paper or cloth and do not light near flammable materials.Failure to do so may result in fire or abnormal heating.Also, do not light near flammable items such as flammable spray, thinner, etc. or items that may ignite.
*Do not install to the headlight with the light on.Failure to do so may result in malfunction or burns.
*This product is waterproof for daily life, but it is not completely waterproof.Wrap the coupler coming out of the controller unit with vinyl tape or self-bonding tape, or use caulking agent to waterproof it.Avoid wetting the product with more water than necessary.
*When washing a vehicle with a high pressure washer, please do not let the high pressure wash directly hit this product.
*Please do not drop the LED bulb or controller unit, or give it a strong shock.It not only causes breakage, deterioration of performance and shortening of service life, but also causes injury.
*When assembling the LED bulb, be sure to apply the supplied silicon grease to the areas indicated by the grease marks in the instruction manual.
*Do not cover up the waterproof fan.Make sure that there is enough space behind the fan for the sucked air to flow.
*Use a thread locker to prevent loosening of the threaded part.Periodic retightening is also recommended.
*Installation requires expertise and skill.Please have it done at a designated maintenance facility with skilled mechanics.
*Please adjust the optical axis before use.It may obstruct the view of oncoming vehicles and cause traffic accidents.
*PROTEC is not responsible for any damage or accident caused by the use of this product.Protec will not be responsible for any labor charges or other costs incurred during repair.
*If you feel any abnormality during installation or use, please contact your dealer or PROTEC service department.
*Before installation, be sure to disconnect the terminal cord on the minus side of the battery and confirm that the key is OFF.
*Please do not touch or get the LED chip dirty.Dirt can cause the LED chip to burn due to heat being built-up.The LED bulb comes with an acrylic cap with a sealing seal.
*Please handle this product with care as it is a precision instrument.Do not drop the product or pull the wires forcibly.Improper handling may cause malfunction, injury, burns, or serious accidents that may result in death.In addition, sparks, poor insulation, or short-circuiting may cause a failure of the product or a fire in the vehicle.
*Do not disassemble or modify this product in any way.Products that have been disassembled or modified are not covered by warranty.
*Do not look directly at the LED light when it is on.It can cause visual impairment.
*Do not splash water on the lens while the light is on or immediately after it is turned off.Sudden temperature change may cause damage to the lens or LED bulb.In addition, please do not touch the LED bulb itself, the heat sink behind it, and the controller unit because they get to the high temperature.
*This product is for motorcycles only, so cannot be used on four-wheeled vehicles.
*Do not cover with paper or cloth and do not light near flammable materials.Failure to do so may result in fire or abnormal heating.Also, do not light near flammable items such as flammable spray, thinner, etc. or items that may ignite.
*Do not install to the headlight with the light on.Failure to do so may result in malfunction or burns.
*This product is waterproof for daily life, but it is not completely waterproof.Wrap the coupler coming out of the controller unit with vinyl tape or self-bonding tape, or use caulking agent to waterproof it.Avoid wetting the product with more water than necessary.
*When washing a vehicle with a high pressure washer, please do not let the high pressure wash directly hit this product.
*Please do not drop the LED bulb or controller unit, or give it a strong shock.It not only causes breakage, deterioration of performance and shortening of service life, but also causes injury.
*When assembling the LED bulb, be sure to apply the supplied silicon grease to the areas indicated by the grease marks in the instruction manual.
*Do not cover up the waterproof fan.Make sure that there is enough space behind the fan for the sucked air to flow.
*Use a thread locker to prevent loosening of the threaded part.Periodic retightening is also recommended.
*Installation requires expertise and skill.Please have it done at a designated maintenance facility with skilled mechanics.
*Please adjust the optical axis before use.It may obstruct the view of oncoming vehicles and cause traffic accidents.
*PROTEC is not responsible for any damage or accident caused by the use of this product.Protec will not be responsible for any labor charges or other costs incurred during repair.
*If you feel any abnormality during installation or use, please contact your dealer or PROTEC service department.
