- Home
- Model
- KAWASAKI 126 - 250cc
- NINJA250 (EX250)
- Motorcycle Parts
- Bodyworks
- Fairings
- Side Covers
- A-TECH
- A-TECH: Side Cowl for SPL2 for Race
Side Cowl for SPL2 for Race
- Product number: K0159790-R02-L
-
- IN STOCK
- Out Stock
- A-TECH
- |
- 0.0
- (0 review)
Check my coupons
Product Detail
[Description]
This product can be installed on A-TECH Upper Cowl SPL2 and Under Cowl SPL2.
It can be installed with the stock seat cowl.
Usually the stock seat will be shipped with a condition the stock cowl can be used.
A large duct is installed in the center of the side cowl, and the waste heat efficiency is dramatically improved.
It can be installed with the stock seat cowl.
Usually the stock seat will be shipped with a condition the stock cowl can be used.
A large duct is installed in the center of the side cowl, and the waste heat efficiency is dramatically improved.
Note
* This item can not be cancelled, returned nor exchange after placing an order.
Caution
*As to FRP (white / black) products
Many products are made by dividing production molds (molds necessary for manufacturing products) into separate sections, and resin burrs are unavoidably generated along the dividing lines of the production molds in the manufacturing process.
When the product is subjected to secondary processing, it is necessary to shave off the resin burrs, and because of this process, the gelcoat of the processed part may be shaved off at the same time.
FRP products have such processing marks, but A-TECH develops and sells them on the premise of painting, so they are not defective.
*The above information does not apply to painted (PT), wet, and dry carbon FRP products.
*The image shows material: FRP / Black is used.
*The image includes other products.
*There may be changes in product specifications due to the manufacturer's reasons.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
Many products are made by dividing production molds (molds necessary for manufacturing products) into separate sections, and resin burrs are unavoidably generated along the dividing lines of the production molds in the manufacturing process.
When the product is subjected to secondary processing, it is necessary to shave off the resin burrs, and because of this process, the gelcoat of the processed part may be shaved off at the same time.
FRP products have such processing marks, but A-TECH develops and sells them on the premise of painting, so they are not defective.
*The above information does not apply to painted (PT), wet, and dry carbon FRP products.
*The image shows material: FRP / Black is used.
*The image includes other products.
*There may be changes in product specifications due to the manufacturer's reasons.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
ALSO VIEWED PRODUCTS
Apply Coupon
Image Review
Review detail
/