Product Detail
Specification:
・Separate lubrication is possible
・Main jet #150 Pilot jet #25 pre-installed
[Kit Contents]
・TM Φ24 carburetor assembly x 1
・Main jet (Mikuni hexagon type/Large) #145 x 1
・Main jet (Mikuni hexagon type/Large) #155 x 1
・Custom Funnel Φ44 x 1
・Throttle sub cable x 1
・Manifold Set x 1
・Manifold body x 1
・Stainless Steel Band (Φ25-40) x 1
・Main jet #150 Pilot jet #25 pre-installed
[Kit Contents]
・TM Φ24 carburetor assembly x 1
・Main jet (Mikuni hexagon type/Large) #145 x 1
・Main jet (Mikuni hexagon type/Large) #155 x 1
・Custom Funnel Φ44 x 1
・Throttle sub cable x 1
・Manifold Set x 1
・Manifold body x 1
・Stainless Steel Band (Φ25-40) x 1
[Description]
This Mikuni FlatΦ24 carburetor recommended for middle tuners.
The race-proven flat valve provides excellent throttle response, power and torque.
The full-flat specification is a racing specification for 2-stroke bikes and mixed fueling to demonstrate the true performance of the flat carburetor.
The attached manifold has a larger port diameter to increase the intake air volume.
The race-proven flat valve provides excellent throttle response, power and torque.
The full-flat specification is a racing specification for 2-stroke bikes and mixed fueling to demonstrate the true performance of the flat carburetor.
The attached manifold has a larger port diameter to increase the intake air volume.
Caution
*Jets need to be set according to the engine specifications and driving environment.The Kitaco Big Carburetor Kit uses the stock kit from the carburetor manufacturer, so please be sure to use the stock kit for setting.If you use other than the stock one, the correct setting will not be obtained and it may cause trouble.
*Stock air cleaner cannot be used.
*It can be used for NS-1, but the throttle sub cable (Part number: 905-1010000) is required separately.It is also necessary to remove or modify the helmet box.
*NSR50/80,NS-1(95-) can not be installed to stock intake chamber.
*The rubber part of the lower part of the manifold needs to be cut for MBX50 depending on the year.
*There may be changes in product specifications due to the manufacturer's reasons.
*Stock air cleaner cannot be used.
*It can be used for NS-1, but the throttle sub cable (Part number: 905-1010000) is required separately.It is also necessary to remove or modify the helmet box.
*NSR50/80,NS-1(95-) can not be installed to stock intake chamber.
*The rubber part of the lower part of the manifold needs to be cut for MBX50 depending on the year.
*There may be changes in product specifications due to the manufacturer's reasons.
