Check my coupons
Product Detail
Specification:
Titaniumium Bolt(M10XL83 P1.25)
Quantity:1 Set of 4pcs. /Quantity:1 Set(Kawasaki Z900RS with 320mmBrake Disc)
Improved undercarriage
Quantity:1 Set of 4pcs. /Quantity:1 Set(Kawasaki Z900RS with 320mmBrake Disc)
Improved undercarriage
[Description]
Adoption of titanium alloy with high strength, heat resistance and corrosion resistance, and light weight (-22g per piece)
Wiring holes available to meet race regulations
Logo, size and tightening torque engraved by laser marking process
Overwhelming difference from stock bolts. AELLA-manufactured caliper bolts are bolts made by cutting titanium.
The right angle of the seat surface to the body of the bolt is extremely high precision, and the seat surface is also wide, so the force to hold the caliper is different even with the same fastening force than the stock bolt.
As a result, AELLA titanium bolts provide stable braking.
The 83mm bolt that is required as the 320mm brake disc is replaced is machined from titanium.
Comparison with stock bolt.(The stock bolts are of DUCATI.) Naturally, the attention to "fastening" is different from that of mass-produced items.
Because the fastening surface of the stock bolt is not flat, a groove is formed on the caliper side.
Wiring holes available to meet race regulations
Logo, size and tightening torque engraved by laser marking process
Overwhelming difference from stock bolts. AELLA-manufactured caliper bolts are bolts made by cutting titanium.
The right angle of the seat surface to the body of the bolt is extremely high precision, and the seat surface is also wide, so the force to hold the caliper is different even with the same fastening force than the stock bolt.
As a result, AELLA titanium bolts provide stable braking.
The 83mm bolt that is required as the 320mm brake disc is replaced is machined from titanium.
Comparison with stock bolt.(The stock bolts are of DUCATI.) Naturally, the attention to "fastening" is different from that of mass-produced items.
Because the fastening surface of the stock bolt is not flat, a groove is formed on the caliper side.
Caution
*Please measure the bolt diameter and length before ordering.
*It can be used for other vehicle models if the size and screw pitch are the same.
*This product is for vehicles equipped with 320mm discs.
*There may be changes in product specifications due to the manufacturer's reasons.
*It can be used for other vehicle models if the size and screw pitch are the same.
*This product is for vehicles equipped with 320mm discs.
*There may be changes in product specifications due to the manufacturer's reasons.
