This is the KEPSPEED's new design you've all been waiting for!
KEPSPEED wide wheels can be easily widened by 0.5J. Of course, the hole pitch is suitable for the stock type wheels of Monkey and Dax (12 holes type). With KEPSPEED precision machining technology, the design ensures that the rim load is transmitted to the hub, not only through the exclusive use of bolts.
If you have bought 5.5J, you don't need to buy again, and you can get wider one. The load transfer structure is also carefully considered. Therefore, it is designed to be installed with a little bit of press fit, which shows the high level of KEPSPEED processing technology. At the rear, you can change 5.5J to 6.0J, or 7.0J to 7.5J! If it is stock width, you can combine 3.5J with 4.0J.
Caution
[Notes on purchase] *All GM-MOTO products are custom parts.Since these products are set up in response to the requests of heavy users, there may be parts of the product that change or decrease from the original driving performance.Please use as dress-up parts for show model machines.Therefore, it is not suitable for driving on public roads or tracks.In some cases, it may not be possible to mount the unit on a motorcycle, or adjustments and modifications may be required in various areas. *There may be changes in product specifications due to the manufacturer's reasons. *This product is designed to be used with KEPSPEED wide swingarm, KEPSPEED 10-inch wide wheel, and wide disc hub. ※ Installation on drum hubs, including stock, is not allowed as the chain line will contact the rim. *Wheel mounted image: The thickness of the attachment is 0.5" (approx. 12.7mm). *Installation image on the demo motorcycle: This is a standard chain.It's a very close separation with a gold reinforced chain. *The image may contain other colors. *Images may contain other products.
[About the installation] ※ Use the attached assembly bolts (M8 x 4pcs + M6 x 8pcs) for assembly. *Fits to KEPSPEED 10-inch wheels. ※ Compatible rims can be installed on DAX type matching wheels, but only 12 hole type (M8 x 4 + M6 x 8 = 12 holes) can be used for assembly bolts. ※ The wheel is manufactured with no margin in the inner diameter of the matching wheel, so adjustment may be necessary depending on the individual.In most cases, evenly tightened bolts ensure proper assembly. ※ If you use the "relief" indentations on the mating surface, it will be easier to work. *When assembling to wheels other than the 10-inch wheels made by KEPSPEED, there is a possibility of deformation if the wheels are subjected to extremely high pressure. *It can be installed onto KEPSPEED 5.5J wide swingarm system, but it is necessary to control the tension of the drive chain thoroughly. *If the tension management of the drive chain is incorrect, It is more likely that the drive chain will contact the wheel rim. ※ After the start of riding, pay attention to the occurrence of so-called initial loosening and perform frequent inspections to prevent unexpected problems.
[Notes on purchase] *All GM-MOTO products are custom parts.In some cases, it may not be possible to install it on the bike, or it may need to be adjusted or processed in various places. ※ There may be some minor specification changes for each product.There may be some points that differ slightly from the introduction image. ※ Please check the condition of the product on the day of arrival for any damage or external flaws. *Because it is made overseas, the molding, welding, painting, etc. may be insufficient.There may be some minor scratches and scuffs due to transportation problems.
