- Beranda
- Sparepart Motor
- Suspensi / Rearset / Velg / Swingarm
- Sparepart Velg
- Sparepart Velg Lainnya
- GM-MOTO
- GM-MOTO: KEPSPEED + Lampiran Lebar Roda 0,5J (16 tipe Spoke)
KEPSPEED + Lampiran Lebar Roda 0,5J (16 tipe Spoke)
- Nomor produk: mky-00277-S
-
- IN STOCK
- Out Stock
- GM-MOTO
- |
- 0.0
- (0 ulasan)
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Pabrikan: KEPSPEED
Negara Asal: China Manufacturer: KEPSPEED
Country of origin :China
Negara Asal: China Manufacturer: KEPSPEED
Country of origin :China
[Deskripsi]
Ini Desain KEPSPEED baru yang telah Anda tunggu-tunggu!
Roda lebar KEPSPEED dapat dengan mudah diperlebar 0,5J !.
Tentu saja, nada ini dapat dipasang ke MONKEY dan DAX (1 Kuantitas: tipe 2pc) Roda pencocokan tipe OEM ..
Teknologi pemesinan presisi KEPSPEED memastikan bahwa beban Rim tidak hanya dikirim ke Bolt, tetapi juga ke hub ..
5.Jika Anda telah membeli 5J, Anda tidak perlu membeli lagi, kami dapat menawarkan Anda lebih banyak Wide !.
Struktur pemindahan beban juga dipikirkan dengan baik ..
Oleh karena itu, ini dirancang untuk dipasang dengan sedikit kesesuaian pers, yang menunjukkan tingkat tinggi teknologi pemrosesan KEPSPEED ..
Dari segi belakang, 5.5J bisa dibuat menjadi 6.0J, 7.0J menjadi 7.5J, dan lebar OEM bisa dibuat menjadi 4.0J dengan menggabungkannya dengan 3.5J .. This is the KEPSPEED's new design you've all been waiting for!
KEPSPEED wide wheels can be easily widened by 0.5J.
Of course, the hole pitch is suitable for the stock type wheels of Monkey and Dax (12 holes type).
With KEPSPEED precision machining technology, the design ensures that the rim load is transmitted to the hub, not only through the exclusive use of bolts.
If you have bought 5.5J, you don't need to buy again, and you can get wider one.
The load transfer structure is also carefully considered.
Therefore, it is designed to be installed with a little bit of press fit, which shows the high level of KEPSPEED processing technology.
At the rear, you can change 5.5J to 6.0J, or 7.0J to 7.5J! If it is stock width, you can combine 3.5J with 4.0J.
Roda lebar KEPSPEED dapat dengan mudah diperlebar 0,5J !.
Tentu saja, nada ini dapat dipasang ke MONKEY dan DAX (1 Kuantitas: tipe 2pc) Roda pencocokan tipe OEM ..
Teknologi pemesinan presisi KEPSPEED memastikan bahwa beban Rim tidak hanya dikirim ke Bolt, tetapi juga ke hub ..
5.Jika Anda telah membeli 5J, Anda tidak perlu membeli lagi, kami dapat menawarkan Anda lebih banyak Wide !.
Struktur pemindahan beban juga dipikirkan dengan baik ..
Oleh karena itu, ini dirancang untuk dipasang dengan sedikit kesesuaian pers, yang menunjukkan tingkat tinggi teknologi pemrosesan KEPSPEED ..
Dari segi belakang, 5.5J bisa dibuat menjadi 6.0J, 7.0J menjadi 7.5J, dan lebar OEM bisa dibuat menjadi 4.0J dengan menggabungkannya dengan 3.5J .. This is the KEPSPEED's new design you've all been waiting for!
KEPSPEED wide wheels can be easily widened by 0.5J.
Of course, the hole pitch is suitable for the stock type wheels of Monkey and Dax (12 holes type).
With KEPSPEED precision machining technology, the design ensures that the rim load is transmitted to the hub, not only through the exclusive use of bolts.
If you have bought 5.5J, you don't need to buy again, and you can get wider one.
The load transfer structure is also carefully considered.
Therefore, it is designed to be installed with a little bit of press fit, which shows the high level of KEPSPEED processing technology.
At the rear, you can change 5.5J to 6.0J, or 7.0J to 7.5J! If it is stock width, you can combine 3.5J with 4.0J.
Peringatan
* Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan pabrikan.
* Produk ini dirancang untuk digunakan dengan swingarm lebar KEPSPEED, roda lebar KEPSPEED 10 inci, dan hub cakram lebar.
* Pemasangan pada hub drum, termasuk hub stok, tidak diperbolehkan karena jalur rantai akan menghubungi rim.
* Gambar pemasangan roda: Ketebalan bagian pemasangan adalah 0,5 inci (Sekitar 12.7mm).
* Gambar mobil demo: Ini adalah pemisahan dengan rantai standar. Dengan rantai yang diperkuat emas, pemisahannya sangat dekat.
* Berisi warna lain di foto.
* Berisi produk lain di foto.
[Instalasi]
* Harap gunakan baut perakitan yang terpasang (M8X4 buah + M6X8 buah) untuk perakitan.
* Cocok untuk KEPSPEED roda 10 inci.
* Pelek yang kompatibel dapat dipasang pada roda yang cocok dengan tipe Dax, tetapi hanya tipe 12 lubang (M8X4 + M6X8 = 12 lubang) Dapat digunakan.
* Karena roda dibuat tanpa margin pada diameter dalam roda yang cocok, pekerjaan penyetelan mungkin diperlukan tergantung pada masing-masing individu. Dalam kebanyakan kasus, pekerjaan perakitan yang benar dapat dilakukan dengan mengencangkan baut secara merata.
* Pengerjaannya lebih mudah jika menggunakan "clearance" lekukan pada permukaan kawin.
* Saat memasang pada roda selain roda 10 inci yang dibuat oleh KEPSPEED, ada kemungkinan roda akan berubah bentuk jika terkena tekanan yang sangat tinggi.
* KEPSPEED Sistem swingarm lebar 5.5J dapat digunakan, tetapi tegangan rantai penggerak harus dikontrol dengan hati-hati.
* Jika manajemen tegangan rantai penggerak tidak benar, rantai penggerak mungkin menyentuh pelek roda. Harap berhati-hati sebelumnya.
* Harap perhatikan terjadinya apa yang disebut "kelonggaran awal" setelah dimulainya proses, harap sering melakukan inspeksi agar tidak menyebabkan masalah yang tidak terduga.
[Catatan tentang pembelian]
* Semua produk GM-MOTO adalah suku cadang khusus. Dalam beberapa kasus, mungkin tidak dapat menginstalnya pada mesin, atau mungkin perlu menyesuaikan atau memodifikasi beberapa bagian.
* Ada kasus dimana ada sedikit perubahan spesifikasi pada bagian detail untuk setiap produk. Ada poin yang sedikit berbeda dari gambar pendahuluan, tapi saya akan mengutamakan hal yang sebenarnya, jadi tolong mengerti, tolong.
* Harap periksa kondisi barang pada hari kedatangan untuk mengetahui adanya kerusakan atau kekurangan eksternal.
[Jaminan]
* Karena masalah transportasi, mungkin ada goresan dan lecet kecil pada paket.
* Garansi tidak mencakup kerusakan yang secara signifikan merusak fungsionalitas produk.
* Harap diperhatikan bahwa TIDAK ADA PENGEMBALIAN, PENUKARAN, dan PEMBATALAN produk setelah pemesanan.
* Selain itu, masalah setelah mulai berkendara sering kali disebabkan oleh ketidaksesuaian dengan situasi mengemudi, situasi perawatan, atau kondisi tubuh, dan dianggap sebagai semua disclaimer karena sulit untuk membedakannya dari penyebab masing-masing produk.
[Notes on purchase]
*All GM-MOTO products are custom parts.Since these products are set up in response to the requests of heavy users, there may be parts of the product that change or decrease from the original driving performance.Please use as dress-up parts for show model machines.Therefore, it is not suitable for driving on public roads or tracks.In some cases, it may not be possible to mount the unit on a motorcycle, or adjustments and modifications may be required in various areas.
*There may be changes in product specifications due to the manufacturer's reasons.
*This product is designed to be used with KEPSPEED wide swingarm, KEPSPEED 10-inch wide wheel, and wide disc hub.
※ Installation on drum hubs, including stock, is not allowed as the chain line will contact the rim.
*Wheel mounted image: The thickness of the attachment is 0.5" (approx. 12.7mm).
*Installation image on the demo motorcycle: This is a standard chain.It's a very close separation with a gold reinforced chain.
*The image may contain other colors.
*Images may contain other products.
[About the installation]
※ Use the attached assembly bolts (M8 x 4pcs + M6 x 8pcs) for assembly.
*Fits to KEPSPEED 10-inch wheels.
※ Compatible rims can be installed on DAX type matching wheels, but only 12 hole type (M8 x 4 + M6 x 8 = 12 holes) can be used for assembly bolts.
※ The wheel is manufactured with no margin in the inner diameter of the matching wheel, so adjustment may be necessary depending on the individual.In most cases, evenly tightened bolts ensure proper assembly.
※ If you use the "relief" indentations on the mating surface, it will be easier to work.
*When assembling to wheels other than the 10-inch wheels made by KEPSPEED, there is a possibility of deformation if the wheels are subjected to extremely high pressure.
*It can be installed onto KEPSPEED 5.5J wide swingarm system, but it is necessary to control the tension of the drive chain thoroughly.
*If the tension management of the drive chain is incorrect, It is more likely that the drive chain will contact the wheel rim.
※ After the start of riding, pay attention to the occurrence of so-called initial loosening and perform frequent inspections to prevent unexpected problems.
[Notes on purchase]
*All GM-MOTO products are custom parts.In some cases, it may not be possible to install it on the bike, or it may need to be adjusted or processed in various places.
※ There may be some minor specification changes for each product.There may be some points that differ slightly from the introduction image.
※ Please check the condition of the product on the day of arrival for any damage or external flaws.
*Because it is made overseas, the molding, welding, painting, etc. may be insufficient.There may be some minor scratches and scuffs due to transportation problems.
* Produk ini dirancang untuk digunakan dengan swingarm lebar KEPSPEED, roda lebar KEPSPEED 10 inci, dan hub cakram lebar.
* Pemasangan pada hub drum, termasuk hub stok, tidak diperbolehkan karena jalur rantai akan menghubungi rim.
* Gambar pemasangan roda: Ketebalan bagian pemasangan adalah 0,5 inci (Sekitar 12.7mm).
* Gambar mobil demo: Ini adalah pemisahan dengan rantai standar. Dengan rantai yang diperkuat emas, pemisahannya sangat dekat.
* Berisi warna lain di foto.
* Berisi produk lain di foto.
[Instalasi]
* Harap gunakan baut perakitan yang terpasang (M8X4 buah + M6X8 buah) untuk perakitan.
* Cocok untuk KEPSPEED roda 10 inci.
* Pelek yang kompatibel dapat dipasang pada roda yang cocok dengan tipe Dax, tetapi hanya tipe 12 lubang (M8X4 + M6X8 = 12 lubang) Dapat digunakan.
* Karena roda dibuat tanpa margin pada diameter dalam roda yang cocok, pekerjaan penyetelan mungkin diperlukan tergantung pada masing-masing individu. Dalam kebanyakan kasus, pekerjaan perakitan yang benar dapat dilakukan dengan mengencangkan baut secara merata.
* Pengerjaannya lebih mudah jika menggunakan "clearance" lekukan pada permukaan kawin.
* Saat memasang pada roda selain roda 10 inci yang dibuat oleh KEPSPEED, ada kemungkinan roda akan berubah bentuk jika terkena tekanan yang sangat tinggi.
* KEPSPEED Sistem swingarm lebar 5.5J dapat digunakan, tetapi tegangan rantai penggerak harus dikontrol dengan hati-hati.
* Jika manajemen tegangan rantai penggerak tidak benar, rantai penggerak mungkin menyentuh pelek roda. Harap berhati-hati sebelumnya.
* Harap perhatikan terjadinya apa yang disebut "kelonggaran awal" setelah dimulainya proses, harap sering melakukan inspeksi agar tidak menyebabkan masalah yang tidak terduga.
[Catatan tentang pembelian]
* Semua produk GM-MOTO adalah suku cadang khusus. Dalam beberapa kasus, mungkin tidak dapat menginstalnya pada mesin, atau mungkin perlu menyesuaikan atau memodifikasi beberapa bagian.
* Ada kasus dimana ada sedikit perubahan spesifikasi pada bagian detail untuk setiap produk. Ada poin yang sedikit berbeda dari gambar pendahuluan, tapi saya akan mengutamakan hal yang sebenarnya, jadi tolong mengerti, tolong.
* Harap periksa kondisi barang pada hari kedatangan untuk mengetahui adanya kerusakan atau kekurangan eksternal.
[Jaminan]
* Karena masalah transportasi, mungkin ada goresan dan lecet kecil pada paket.
* Garansi tidak mencakup kerusakan yang secara signifikan merusak fungsionalitas produk.
* Harap diperhatikan bahwa TIDAK ADA PENGEMBALIAN, PENUKARAN, dan PEMBATALAN produk setelah pemesanan.
* Selain itu, masalah setelah mulai berkendara sering kali disebabkan oleh ketidaksesuaian dengan situasi mengemudi, situasi perawatan, atau kondisi tubuh, dan dianggap sebagai semua disclaimer karena sulit untuk membedakannya dari penyebab masing-masing produk.
[Notes on purchase]
*All GM-MOTO products are custom parts.Since these products are set up in response to the requests of heavy users, there may be parts of the product that change or decrease from the original driving performance.Please use as dress-up parts for show model machines.Therefore, it is not suitable for driving on public roads or tracks.In some cases, it may not be possible to mount the unit on a motorcycle, or adjustments and modifications may be required in various areas.
*There may be changes in product specifications due to the manufacturer's reasons.
*This product is designed to be used with KEPSPEED wide swingarm, KEPSPEED 10-inch wide wheel, and wide disc hub.
※ Installation on drum hubs, including stock, is not allowed as the chain line will contact the rim.
*Wheel mounted image: The thickness of the attachment is 0.5" (approx. 12.7mm).
*Installation image on the demo motorcycle: This is a standard chain.It's a very close separation with a gold reinforced chain.
*The image may contain other colors.
*Images may contain other products.
[About the installation]
※ Use the attached assembly bolts (M8 x 4pcs + M6 x 8pcs) for assembly.
*Fits to KEPSPEED 10-inch wheels.
※ Compatible rims can be installed on DAX type matching wheels, but only 12 hole type (M8 x 4 + M6 x 8 = 12 holes) can be used for assembly bolts.
※ The wheel is manufactured with no margin in the inner diameter of the matching wheel, so adjustment may be necessary depending on the individual.In most cases, evenly tightened bolts ensure proper assembly.
※ If you use the "relief" indentations on the mating surface, it will be easier to work.
*When assembling to wheels other than the 10-inch wheels made by KEPSPEED, there is a possibility of deformation if the wheels are subjected to extremely high pressure.
*It can be installed onto KEPSPEED 5.5J wide swingarm system, but it is necessary to control the tension of the drive chain thoroughly.
*If the tension management of the drive chain is incorrect, It is more likely that the drive chain will contact the wheel rim.
※ After the start of riding, pay attention to the occurrence of so-called initial loosening and perform frequent inspections to prevent unexpected problems.
[Notes on purchase]
*All GM-MOTO products are custom parts.In some cases, it may not be possible to install it on the bike, or it may need to be adjusted or processed in various places.
※ There may be some minor specification changes for each product.There may be some points that differ slightly from the introduction image.
※ Please check the condition of the product on the day of arrival for any damage or external flaws.
*Because it is made overseas, the molding, welding, painting, etc. may be insufficient.There may be some minor scratches and scuffs due to transportation problems.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/