Check my coupons
Quantity
100% Original
7 Days Warranty
Free Cashback
Net Price
Product Detail
[Description]
This product is a main harness that eliminates the need to modify or add wiring when installing SP Takegawa custom parts.
■Details
In addition to the stock wiring functions, various wiring for SP Takegawa meters, a connector that enables battery charging in the vehicle, and a ground wire have been added, and a Honda stock alarm kit (vehicle theft deterrent device) can be connected by coupler-on.
There is no need to modify the wiring (except for Gorilla) and it is easy to install by simply replacing the stock main harness.
Not only do we use wiring tubes and couplers to organize the wiring, but we also use mesh tubes and couplers at the harness neck where the harness is exposed to increase the visual appeal of the main harness. It also has a mesh tube at the harness neck where the harness is exposed.
■Equipped with various wiring for SP Takegawa meters and connection wiring for LED lamps
The power supply, key ON power supply, grounding, turn indicator and tachometer pulse wires are all located inside the headlight case for easy installation of SP Takegawa meters.
The tachometer pulse wire is usually exposed, but by installing this product, the wiring will not be exposed.
The RPM signal can be selected between the primary side of the ignition coil and the pickup coil pulse, depending on the connection part of the connector.
When you use LED tail lamp, you need to make sub-harness or use electro tap for DC lighting of small lamp.
By installing this product, you can change the small lamp to DC lighting by connecting the connector.
■An additional connector is provided for charging without removing the battery
The Super Main Harness has an additional connector that allows you to charge the battery without removing the battery from the vehicle, so you can charge the battery while the battery is still installed in the vehicle by attaching the kit's accessory connector and terminals to the charger.
■CTEK battery charger is recommended.
CTEK Battery Charger & Maintainer XS 0.8JP 08-02-0032
By connecting this battery charger at any time, even if the vehicle is not started for a long period of time, you can maintain the battery and keep it in good condition.
■Add a ground wireWe have added a ground wire that can strengthen the grounding of the engine and frame.This enhances the arching effect.
■Connection to the HONDA stock alarm kit (vehicle theft deterrent) can be done
The HONDA stock alarm kit (vehicle theft deterrent device) can be installed by coupler-on without the need for wiring.
Also, the indicator lamp, which is an optional part of the alarm kit, can be installed by coupler-on without the need for wiring.
■Details
In addition to the stock wiring functions, various wiring for SP Takegawa meters, a connector that enables battery charging in the vehicle, and a ground wire have been added, and a Honda stock alarm kit (vehicle theft deterrent device) can be connected by coupler-on.
There is no need to modify the wiring (except for Gorilla) and it is easy to install by simply replacing the stock main harness.
Not only do we use wiring tubes and couplers to organize the wiring, but we also use mesh tubes and couplers at the harness neck where the harness is exposed to increase the visual appeal of the main harness. It also has a mesh tube at the harness neck where the harness is exposed.
■Equipped with various wiring for SP Takegawa meters and connection wiring for LED lamps
The power supply, key ON power supply, grounding, turn indicator and tachometer pulse wires are all located inside the headlight case for easy installation of SP Takegawa meters.
The tachometer pulse wire is usually exposed, but by installing this product, the wiring will not be exposed.
The RPM signal can be selected between the primary side of the ignition coil and the pickup coil pulse, depending on the connection part of the connector.
When you use LED tail lamp, you need to make sub-harness or use electro tap for DC lighting of small lamp.
By installing this product, you can change the small lamp to DC lighting by connecting the connector.
■An additional connector is provided for charging without removing the battery
The Super Main Harness has an additional connector that allows you to charge the battery without removing the battery from the vehicle, so you can charge the battery while the battery is still installed in the vehicle by attaching the kit's accessory connector and terminals to the charger.
■CTEK battery charger is recommended.
CTEK Battery Charger & Maintainer XS 0.8JP 08-02-0032
By connecting this battery charger at any time, even if the vehicle is not started for a long period of time, you can maintain the battery and keep it in good condition.
■Add a ground wireWe have added a ground wire that can strengthen the grounding of the engine and frame.This enhances the arching effect.
■Connection to the HONDA stock alarm kit (vehicle theft deterrent) can be done
The HONDA stock alarm kit (vehicle theft deterrent device) can be installed by coupler-on without the need for wiring.
Also, the indicator lamp, which is an optional part of the alarm kit, can be installed by coupler-on without the need for wiring.
Caution
*Not compatible with FI vehicles.
*When you use LED tail lamp, you need to make a sub-harness or use electro tap for DC lighting of small lamp.
*When using this product on the Gorilla, additional processing such as adding a blinker body ground wire and extending the wiring of the blinker relay is required.
*When using the stock side stand on a vehicle with a side stand switch, use the side stand switch connector supplied with the vehicle as it can be connected to the side stand if it has 2 poles but not if it has 3 poles.In this situation the side stand indicator light cannot be used.
*This product cannot be used for Monkey BAJA and Monkey R.
*There may be changes in product specifications due to the manufacturer's reasons.
*Depending on the lot, the product may be delivered with the old price and label with the old JAN code before the price change.
*When you use LED tail lamp, you need to make a sub-harness or use electro tap for DC lighting of small lamp.
*When using this product on the Gorilla, additional processing such as adding a blinker body ground wire and extending the wiring of the blinker relay is required.
*When using the stock side stand on a vehicle with a side stand switch, use the side stand switch connector supplied with the vehicle as it can be connected to the side stand if it has 2 poles but not if it has 3 poles.In this situation the side stand indicator light cannot be used.
*This product cannot be used for Monkey BAJA and Monkey R.
*There may be changes in product specifications due to the manufacturer's reasons.
*Depending on the lot, the product may be delivered with the old price and label with the old JAN code before the price change.
