Check my coupons
Product Detail
Specification:
for racing
[Description]
This product is installed over the stock upper cowl.
Note
* This product will be made after an order, We will notice currect shipping time after we recieve an order.
* This item can not be cancelled, returned nor exchange after placing an order.
Caution
*About FRP (white / black) products
Many products are made by dividing production molds (molds necessary for manufacturing products) into separate sections, and resin burrs are unavoidably generated along the dividing lines of the production molds in the manufacturing process.
When the product is subjected to secondary processing, it is necessary to shave off the resin burrs, and because of this process, the gelcoat of the processed part may be shaved off at the same time.
FRP products have such processing marks, but A-TECH develops and sells them on the premise of painting, so they are not defective.
*The above information does not apply to painted (PT), wet, and dry carbon FRP products.
*There may be changes in product specifications due to the manufacturer's reasons.
*Image is twill weave carbon.
*FRP and carbon products are not clear coated.
*If you wish to have clear coating finish, please select "with clear coating" in [Finish] and add it to the cart.
[For FRP (white/black) products]
*Many of our products are made by dividing production molds (molds necessary to produce products), and resin burrs inevitably occur along the dividing lines of production molds in the manufacturing process.
*When secondary processing is performed on a product, a processing step is required to remove resin burrs.
*FRP products have such processing marks, but there is no problem in use, and they are not defective.
*We appreciate your understanding in advance and appreciate your purchase.
*The above information does not apply to painted (PT), wet, and dry carbon FRP products.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
Many products are made by dividing production molds (molds necessary for manufacturing products) into separate sections, and resin burrs are unavoidably generated along the dividing lines of the production molds in the manufacturing process.
When the product is subjected to secondary processing, it is necessary to shave off the resin burrs, and because of this process, the gelcoat of the processed part may be shaved off at the same time.
FRP products have such processing marks, but A-TECH develops and sells them on the premise of painting, so they are not defective.
*The above information does not apply to painted (PT), wet, and dry carbon FRP products.
*There may be changes in product specifications due to the manufacturer's reasons.
*Image is twill weave carbon.
*FRP and carbon products are not clear coated.
*If you wish to have clear coating finish, please select "with clear coating" in [Finish] and add it to the cart.
[For FRP (white/black) products]
*Many of our products are made by dividing production molds (molds necessary to produce products), and resin burrs inevitably occur along the dividing lines of production molds in the manufacturing process.
*When secondary processing is performed on a product, a processing step is required to remove resin burrs.
*FRP products have such processing marks, but there is no problem in use, and they are not defective.
*We appreciate your understanding in advance and appreciate your purchase.
*The above information does not apply to painted (PT), wet, and dry carbon FRP products.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
