- Home
- Tools
- Hose Clips / Clamps
- KIJIMA
- KIJIMA: Stainless Steel Band
Check my coupons
Product Detail
Specification:
[Material]
・Hoop: Stainless steel (SUS430)
・Housing: Stainless steel (SUS304)
・Screw: Trivalent chromate treated iron (SWCH)
[Type]
・Screw shape: 7mm HEX / Hexagonal Minus
[Size]
・Appropriate tightening torque: 2.5N・m-3.5N・m
・Thickness of hoop section: 0.6t
・Hoop section board width: 9mm
[Quantity]
・Set of 2
・Hoop: Stainless steel (SUS430)
・Housing: Stainless steel (SUS304)
・Screw: Trivalent chromate treated iron (SWCH)
[Type]
・Screw shape: 7mm HEX / Hexagonal Minus
[Size]
・Appropriate tightening torque: 2.5N・m-3.5N・m
・Thickness of hoop section: 0.6t
・Hoop section board width: 9mm
[Quantity]
・Set of 2
[Description]
In hose clamps, the balance of the components is important as well as the tightening torque and construction.
We offer a pack of two semi-stainless steel bands that are compatible with hoses made of semi-stainless steel material, with compatibility and balance with the hose as our first priority.
■Features
ASSY
Unlike conventional welding and caulking, the hoop and screw are held perfectly in the housing by a proprietary one-touch locking mechanism for maximum functionality.
■Resistance
Additional laser welding was applied to the housing back seam.
This improves the rigidity of the clamp by approximately 20% compared to the conventional product.
[Reference value] Fracture torque (average value): 9mm width specificationApprox. 8-9N-m
■Tightening (screw)
The screw threads and hoop grooves are ideally meshed in the housing without loosening due to vibration, etc., and boast strong tightening torque.
■The shape of the groove on the hoop surface differs from that of the bleed-through type, allowing the inner surface of the groove to engage the hose when tightening, resulting in stronger tightening.
(Special groove processing) Even when used over a long period of time, the hose will not stick out of the joints due to aging.
■Quality
The hoop is as smooth as a mirror surface on both the inside and outside diameters, and the radiused hoop edge eliminates burrs and prevents damage to the hose even when tightened too hard.
■Technology
The screw tip is tightened at the end of the revolutionarily designed housing to form a trinity that smartly and functionally ties the individual parts together.
We offer a pack of two semi-stainless steel bands that are compatible with hoses made of semi-stainless steel material, with compatibility and balance with the hose as our first priority.
■Features
ASSY
Unlike conventional welding and caulking, the hoop and screw are held perfectly in the housing by a proprietary one-touch locking mechanism for maximum functionality.
■Resistance
Additional laser welding was applied to the housing back seam.
This improves the rigidity of the clamp by approximately 20% compared to the conventional product.
[Reference value] Fracture torque (average value): 9mm width specificationApprox. 8-9N-m
■Tightening (screw)
The screw threads and hoop grooves are ideally meshed in the housing without loosening due to vibration, etc., and boast strong tightening torque.
■The shape of the groove on the hoop surface differs from that of the bleed-through type, allowing the inner surface of the groove to engage the hose when tightening, resulting in stronger tightening.
(Special groove processing) Even when used over a long period of time, the hose will not stick out of the joints due to aging.
■Quality
The hoop is as smooth as a mirror surface on both the inside and outside diameters, and the radiused hoop edge eliminates burrs and prevents damage to the hose even when tightened too hard.
■Technology
The screw tip is tightened at the end of the revolutionarily designed housing to form a trinity that smartly and functionally ties the individual parts together.
Caution
*There may be changes in product specifications due to the manufacturer's reasons.
ALSO VIEWED PRODUCTS
Apply Coupon
Image Review
Review detail
/