- Home
- Model
- SUZUKI 126 - 250cc
- RGV250 Gamma
- Motorcycle Parts
- Drive Parts
- Clutch Kit
- DMR-JAPAN
- DMR-JAPAN: 6pcs Clutch Kit
Check my coupons
Product Detail
Specification:
DrilledPlateSpec. /Street Type
[Product Contents]
Clutch Disc:6pcs
Clutch Plates:7pcs
Reinforced Clutch Spring:Wiring Band5pcs
[Product Contents]
Clutch Disc:6pcs
Clutch Plates:7pcs
Reinforced Clutch Spring:Wiring Band5pcs
[Description]
★*DMR-JAPAN original parts!*
By increasing the number of friction discs by one, it is effective to prevent slippage in high power engines!
This is the type that uses the [stock disc] which has excellent connection and control.
The HI-MU 6-disc specification emphasizes non-slip performance, but it tends to cause judder, which is characteristic of reinforced discs, and reduces the pulse at the start and controllability at the half-clutch.
It is inferior to HI-Mu disc in the aspect of the prevention of slippage, so it can be used safely even if it is over 70 horsepower by using the attached reinforced spring.
[Drilled plate adopted]
The clutch plate is drilled with 48 pieces to reduce weight and improve ventilation for better heat dissipation, and the degassing effect stabilizes the mu characteristics and improves control.
This special plate has excellent self-cleaning properties and eliminates carbonized components to maintain condition stability!
When used in combination with the newly developed [Spakire-kun], which converts the release bearing from a ball to a needle, the link ratio becomes appropriate, clutch operation becomes lighter, and operability is greatly improved.
This special part is highly recommended as it is effective regardless of clutch manufacturer!
By increasing the number of friction discs by one, it is effective to prevent slippage in high power engines!
This is the type that uses the [stock disc] which has excellent connection and control.
The HI-MU 6-disc specification emphasizes non-slip performance, but it tends to cause judder, which is characteristic of reinforced discs, and reduces the pulse at the start and controllability at the half-clutch.
It is inferior to HI-Mu disc in the aspect of the prevention of slippage, so it can be used safely even if it is over 70 horsepower by using the attached reinforced spring.
[Drilled plate adopted]
The clutch plate is drilled with 48 pieces to reduce weight and improve ventilation for better heat dissipation, and the degassing effect stabilizes the mu characteristics and improves control.
This special plate has excellent self-cleaning properties and eliminates carbonized components to maintain condition stability!
When used in combination with the newly developed [Spakire-kun], which converts the release bearing from a ball to a needle, the link ratio becomes appropriate, clutch operation becomes lighter, and operability is greatly improved.
This special part is highly recommended as it is effective regardless of clutch manufacturer!
Caution
*The clutch plate is covered with anti-rust oil, so please degrease it thoroughly when installing.
*There may be changes in product specifications due to the manufacturer's reasons.
*There may be changes in product specifications due to the manufacturer's reasons.
Applicable Models
ALSO VIEWED PRODUCTS
Apply Coupon
Image Review
Review detail
/