Check my coupons
Product Detail
Specification:
[Spring Part Number] 1805
[Fork oil No. / oil level] SAE15 / 150mm
[Preload adjustment] No adjustment
[Sag value] 40mm
[Compression adjustment] No adjustment
[Rebound adjustment] No adjustment
[Fork oil No. / oil level] SAE15 / 150mm
[Preload adjustment] No adjustment
[Sag value] 40mm
[Compression adjustment] No adjustment
[Rebound adjustment] No adjustment
[Description]
This is a suspension spring with "Constant Rising Rate" designed by Hyperpro.
The spring rate constantly changes to follow the movement of the suspension.
It is not too soft and not too hard, and has the power to hold on even under heavy cornering and emergency braking.
・The front springs are supplied with the required amount of fork oil.
・The change of the caster at the time of braking before the corner is optimized, and it makes it easy to move to the next operation.It absorbs small gaps during cornering and eliminates vibrations that interfere with the rider.
・Unlike normal springs, these springs do not have a constant spring rate and therefore do not resonate.
・After the springs are wound by computer-controlled machine tools, they are shot to remove minute scratches on the surface which may lead to deterioration of performance.In addition, after the completion, the performance of each unit is inspected by a tester.
・In the Netherlands, the home of Hyperpro, all emergency bikes are equipped with Hyperpro springs.
The spring rate constantly changes to follow the movement of the suspension.
It is not too soft and not too hard, and has the power to hold on even under heavy cornering and emergency braking.
・The front springs are supplied with the required amount of fork oil.
・The change of the caster at the time of braking before the corner is optimized, and it makes it easy to move to the next operation.It absorbs small gaps during cornering and eliminates vibrations that interfere with the rider.
・Unlike normal springs, these springs do not have a constant spring rate and therefore do not resonate.
・After the springs are wound by computer-controlled machine tools, they are shot to remove minute scratches on the surface which may lead to deterioration of performance.In addition, after the completion, the performance of each unit is inspected by a tester.
・In the Netherlands, the home of Hyperpro, all emergency bikes are equipped with Hyperpro springs.
Note
* The image is only for reference. The image shown may differ from the actual product.
Caution
*There may be changes in product specifications due to the manufacturer's reasons.
