Model Name:KX125

Manufacturer:KAWASAKI

Model Year:2007

It mounted a case reed intake 2-stroke engine that achieved more than 40PS peak power and sufficient mid-low speed torque by adopting the exhaust device KIPS (Kawasaki Integrated Power-valve System). Its frame was a steel pipe perimeter type. It was equipped with other abundant features, such as the clutch lever bracket with a quick adjuster, pedal disc that reduced mud sticks on the brake pads, or the RENTHAL aluminum handle lever. It was good for the brush up lessons for kid riders, as well as racing use. It was both easy to handle and full of potential. The MY2008 model had a new graphic design. The MY2008 model became its last model, and was integrated into the 4-stroke KX250F.

Specifications:

[Basic spec]

Manufacturer	KAWASAKI	Engine Type	Water-Cooled 2 Stroke Single Cylinder Crankcase Reed Valve
Model Name	KX125	Starter	Kick Starter
Grade	–	Maximum Output (ps)	41.0ps(30.2kw)/11500rpm
Drive Train	–	Maximum Torque (kgf/m)	2.70kg-m(26.5N-m)/10500rpm
Model Type	KX125M(KX125M)	Curb Weight	97 (Approximate Value)
Displacement	124	Dry Weight	87
Sales Launch Year	2007/7	Fuel Efficiency by Catalog	–
Height/Width/Length	1265/-/2165	Fuel Tank Capacity	8.2
Seat Height	945	Distance to Empty	–
Front Tire Indication	80/100-21 51M	Fuel Supply	Carburetor
Rear Tire Indication	100/90-19 57M

[Service data]

Standard Plug	BR9ECMVX	Chain Size	520
Number of Used Plugs	–	Chain Link Number	114
Engine Oil Amount	0.7	Battery Code	–
Engine Oil (Refill)	–	Headlight	–
Engine Oil (Element Replacement)	–	Headlight Type	–
Front Blinker Rating	–	Headlight Remarks	–
Drive Sprocket Teeth Number	13	Tail Light Rating	–
Driven Sprocket Teeth Number	51	Rear Blinker Rating	–

[Machine detail]

Motor Model Code	–	Caster Angle	–
Bore (mm)	54	Trail (mm)	–
Storke (mm)	54.5	Minimum Ground Clearance	–
Compression Ratio	11.1	Distance Between Axes	–
Ignition Method	Electronic Propulsion AC-CDI	Streering Angle (Right)	–
Engine Lubrication Type	Mixed （32:1）	Turning Angle (Left)	–
Frame Type	Perimeter Frame	Mirror Screw Hole Diameter	–
Minimum Rotaion Radius	–	Fuel Tank Reserve Capacity	–

[Underbody detail]

Front Brake Type	Single Disc Brake250mm (Outer Diameter)	Suspension Type (Rear)	Swing Arm (New Link/Uni-Trak)
Front Brake Remarks	–	Number of Rear Shock Absorbers	–
Rear Brake Type	Single Disc Brake240mm (Outer Diameter)	Rear Suspension Stroke	–
Rear Brake Remarks	–	Rear Wheel Travel	–
Suspension Type (Front)	Telescopic (Inverted, Inner Tube Diameter: 48mm)	ABS	–
Front Fork Type	–	Drive Train	–
Front Suspension Stroke	–	Differential Oil Amount	–
Front Fork Diameter	–	Chain Remarks	–

[Equipment]

Seat Lowering Allowance	–	Theft Prevention Device	–
Mirror Screw Hole Diameter	–	Tail Light Bulb Type	–
Mirror Remarks	–	Tail Light Base Shape	–
Electronic Device Remarks	–	Tail Light Base Shape 2	–
Fuel Gauge	–	Tail Light Remarks	–
Clock	–	Front Blinker Bulb Type	–
Hazard	–	Front Blinker Base Shape	–

[Engine detail]

Clutch Type	Wet Multiple Plate Chain	Tappet Clearance (mm) EX	–
Transmission	Permanently Engaged 6-Stage Normal Shift式	Idling Initial Value (rpm)	–
Number of Gears	6	Needle Steps (Clip Location)	–
Gear Ratio	2.384 / 1.857 / 1.529 / 1.294 / 1.125 / 1.000	Float Level (mm)	9.5
Primary Reduction Ratio	3.2	Air Screw Return	2.5
Secondary Reduction Ratio	3.923	Main Jet Type	–
Variable Speed Vehicle Gear Ratio	–	Main Jet Number	#420
Tappet Clearance (mm) IN	–

[Other spec]

Clutch Cable Length	–	Rear Brake Cable Length	–
Choke Cable Length	–	Other Cables	–
Meter Cable Length	–	Engine Number (Production Launch)	–
Throttle Cable Length	–	Engine Number (Production End)	–
Front Brake Cable Length	–

[See Moto Index of KAWASAKI]
[See Accessories for KAWASAKI KX125]