Model Name:HORNET 600

Manufacturer:HONDA

Model Year:1998

It had the mono-backbone engine hanger like 250 model. The water-cooled straight 4 engine was based on the ones of CBR600F, and its intake was narrowed down from Φ36 to Φ34 to maintain its balance.

Specifications:

[Basic spec]

Manufacturer	HONDA	Engine Type	Water-Cooled 4 Stroke DOHC 4-Valve Straight 4 Cylinder
Model Name	HORNET 600	Starter	–
Grade	–	Maximum Output (ps)	69ps(51kw)/11500rpm
Drive Train	–	Maximum Torque (kgf/m)	5.3kg-m(52.0N-m)/7500rpm
Model Type	PC34	Curb Weight	195
Displacement	599	Dry Weight	191(Approximate Value)
Sales Launch Year	1998/0	Fuel Efficiency by Catalog	–
Height/Width/Length	1055/-/2040	Fuel Tank Capacity	–
Seat Height	–	Distance to Empty	–
Front Tire Indication	130/70ZR16 61W TL	Fuel Supply	Carburetor
Rear Tire Indication	180/55ZR17 73W TL

[Service data]

Standard Plug	CR8EH-9	Chain Size	525
Number of Used Plugs	4	Chain Link Number	110
Engine Oil Amount	–	Battery Code	FTX7L-BS
Engine Oil (Refill)	3.5L	Headlight	12V 60w/55w
Engine Oil (Element Replacement)	3.8L	Headlight Type	H4
Front Blinker Rating	12V 18w/5w	Headlight Remarks	–
Drive Sprocket Teeth Number	15	Tail Light Rating	12V 23w/8w
Driven Sprocket Teeth Number	40	Rear Blinker Rating	12V 15w

[Machine detail]

Motor Model Code	PC25E	Caster Angle	–
Bore (mm)	–	Trail (mm)	–
Storke (mm)	–	Minimum Ground Clearance	–
Compression Ratio	–	Distance Between Axes	–
Ignition Method	–	Streering Angle (Right)	–
Engine Lubrication Type	–	Turning Angle (Left)	–
Frame Type	–	Mirror Screw Hole Diameter	10mm
Minimum Rotaion Radius	–	Fuel Tank Reserve Capacity	–

[Underbody detail]

Front Brake Type	Double Disc	Suspension Type (Rear)	–
Front Brake Remarks	–	Number of Rear Shock Absorbers	–
Rear Brake Type	Disc	Rear Suspension Stroke	–
Rear Brake Remarks	–	Rear Wheel Travel	–
Suspension Type (Front)	–	ABS	–
Front Fork Type	–	Drive Train	Chain
Front Suspension Stroke	–	Differential Oil Amount	–
Front Fork Diameter	–	Chain Remarks	–

[Equipment]

Seat Lowering Allowance	–	Theft Prevention Device	–
Mirror Screw Hole Diameter	10mm	Tail Light Bulb Type	S25
Mirror Remarks	Genuine Adapter: Type D	Tail Light Base Shape	BAY15D
Electronic Device Remarks	–	Tail Light Base Shape 2	–
Fuel Gauge	–	Tail Light Remarks	–
Clock	–	Front Blinker Bulb Type	T20
Hazard	–	Front Blinker Base Shape	Wedge (Large/Double), Wedge (Middle)

[Engine detail]

Clutch Type	–	Tappet Clearance (mm) EX	–
Transmission	–	Idling Initial Value (rpm)	–
Number of Gears	–	Needle Steps (Clip Location)	–
Gear Ratio	–	Float Level (mm)	–
Primary Reduction Ratio	–	Air Screw Return	–
Secondary Reduction Ratio	2.667	Main Jet Type	KEIHIN Round Large (E)
Variable Speed Vehicle Gear Ratio	–	Main Jet Number	#95+#100
Tappet Clearance (mm) IN	–

[Other spec]

Clutch Cable Length	930	Rear Brake Cable Length	640
Choke Cable Length	780	Other Cables	Direct (R)750/(L)800
Meter Cable Length	–	Engine Number (Production Launch)	–
Throttle Cable Length	805/810	Engine Number (Production End)	–
Front Brake Cable Length	Direct (R)750/(L)800

[See Moto Index of HONDA]
[See Accessories for HONDA HORNET 600]