Best chooper style seat in the markey

You couldn't find a much more stunning seat plus it's much lowered than the stock seat if you're looking would definitely deal with them again if I need a seat replacement View detail

Heal Support improves knee grip

Once the entire footpeg was removed, installation took less than 10 minutes!
Right hits the Heel, but Left has a 2cm gap.
Spacer was installed and Bolt was changed to a long one.
Hold is now possible from the heel to the knee in a plane.
Motorcycle is firmly stabilized.
I should have put it on sooner.

However, I think the Left Side Spacer is the key point. View detail

LOW Seat for good footing and cushioning!

[How is it used?
The Normal seat has good leg room, but the seat surface is hard and my buttocks hurt after driving for a long time, so I replaced it with the Seat, which has better cushioning.

Was the one you received as per Image?
The quality was as high as the Image.
The back of the seat is carefully crafted with many rubber cushions and screw fasteners in the seat fabric.

Was the installation difficult?
The Normal seat can be easily replaced by simply removing the Normal seat and replacing it.
The OEMSeat Bracket is made unnecessary.

How was your experience with it?
I use Seat for 14Liter and it is quite good as it does not sacrifice footing and has better Cushioning!
The design is a matter of taste, but it fits beautifully along with the shape of the tank. The tuck roll is my personal favorite design of Large, and I think that the backward Seat's Brass Plate also has a luxurious feel to it.

[Included Parts:were they on?
Seat set only, no other parts etc.

[Was there anything that disappointed you?
It is a little disappointing that the price is so expensive.
Also, since there are different types of tanks depending on the shape of the tank, if the tank is replaced, the Seat will also need to be replaced.

▼I used the MID Type before, but I think this one has better balance because the footing became worse as the cushioning improved. View detail

It is a soft and comfortable Seat!

[How is it used?
The NORMAL Seat was hard and became very painful to ride for a long time, so I purchased the K&H Seat, which is thicker and more comfortable and is well-received.

Was the one you received as per Image?
It is heavier than the Image Firmly, and I was surprised at the very careful construction, even down to the anti-vibration Rubber and Bracket on the back side.

Was the installation difficult?
Bolt On for easy installation.

How was your experience with it?
I had high expectations since it is a luxury Seat, but when I actually use it, it is soft and very comfortable.
I think it is less tiring for long touring.
Since the ride height was raised slightly up and back with the Rear Sets, the ride quality became NORMAL.
The Seat height is increased by about 1 cm, which makes the footing a little worse, but even so, it is acceptable because it is Plus.

[Included Parts:were they on?
Nothing in particular.Bracketetetc.complete set is Quantity:Set

[Was there anything that disappointed you?
The price is high only because the thing is the thing.

The other lineups are also abundant, such as for 14-liter tanks, 17-liter tanks, ATuck, BTuck, etc., and it is very difficult to decide when to order. View detail

Seat selection, I had a serious problem with it (laughs).

Seat of Motorcycle What's
AKA Saddle is one of the components of a motorcycle and is a seat for the rider to sit on. Seat." Also referred to as

Seat type by vehicle type.
General on road motorcycle
Nii Grip" The lower part of the tank is covered by a portion of the seat. In addition, the overall design has gentle curves, and when the rider sits on it, the front and rear Quantities:Pair (for Left and Right) It is also easy to change the position of the hips and shift the weight to the 。 Flat seats are used throughout. →SR is this one (laughs).

Off-road motorcycle‥
Compared to other Genre motorcycles, it has an elongated and flat Seat shape in the front and rear. The reason for this is that off-road motorcycles themselves are designed to be ridden on rough roads such as unpaved roads and forest roads. 。 Rider is required to adopt a shock-absorbing posture, such as standing on rough roads. More often than the Nii Grip, the ankles are used to pinch the body of the vehicle 。 The Design is designed to make it easy to stand and ride, and to change the seating position back and forth.
* Not suitable for driving on highways or for long periods of sitting.
If you are going on a long touring trip, it is recommended to use a seat cushion or similar to reduce the burden of the sitting posture. 。

SUPER SPORTS750‥
Leaning forward to Quantities:Pair (for Left and Right) The slope is designed so that the weight can be shifted to the "Riding position," and many of them are shaped like a triangle.
Riders who enjoy Sports driving frequently hip Quantity:Pair (for Left and Right) The surface of the Seat of the Super sports model is often made of a smooth material because the center of gravity is often changed by moving the Seat to the center of gravity. 。 Also, there is less Space before and after Seat. When driving on the highway or wading, theQuantity:Pair (for Left and Right) It can be said that Seat can easily change the center of gravity by shifting the load to the
Seat area available for passengers is small, and in most cases, it is not practical. 。 →GSX-R125 is this one.

Scooter
Since storage space is provided under the seat, it is generally designed to be wide and flat. When a rider straddles a scooter, he or she sits on the motorcycle in a posture similar to sitting on a chair. When a rider straddles the scooter, he or she rides the motorcycle in a chair-like posture.

Big scooter‥
It is designed in such a way that the driver and passengers can easily find the same seating position, which is convenient when driving a Tandem. The Seat is also flexible in terms of where to place the feet, so it can be said to be a Seat that can be used by any passenger regardless of size, height, or gender.

How to choose a Seat with the least amount of mistakes.
Cushion material
Quantity of ride comfort:Pair (for Left and Right) Cushion material to be
☆Sponge→ used on older Motorcycles. Low durability and low cost.

☆Urethane→ General. There are low resilience pillows in the world, for example, that is low resilience Urethane. By using this for seat cushion material, it can provide excellent riding comfort because it has moderate elasticity while firmly supporting large buttocks. Custom seat shops that specialize in this type of seat can choose from a variety of ranks, such as Hard, Medium, and so on.

T-NET→ is a Cushion material used by Sobi Noguchi Co. Compared to low resilience urethane, it is said to be an excellent material that retains resilience even though it is thin and does not depend on temperature. It is not common (laugh).


Cushion material thickness
◎Thin = lower seating position for better footing
However, it is not suitable for long touring due to its low cushioning.
◎Thickness = High cushioning, which helps reduce fatigue in long tours, etc.
However, the seating position is higher, so the footing is worse.


Based on the above, considering my running style, shape, cushionability, and thickness of cushion material, I chose the Normal seat (lol).
I chose K&H's Seat, which is a long-established company in the Seat industry and has been making Seat for SR for a long time.


good point
◎The position of the hips is much higher and more comfortable while driving because of less sinking.
◎Compared to the normal seat, the corners are shaved so there is no worsening of the footing.

Can use ◎OEMSeat Cowl. Reluctant (LOL)

Injection sponge, which is neither sponge nor urethane, is the material that realizes elasticity and softness.

◎No adhesives 。 Integral molding. Long life with low sagging.


A bad point
Disparate prices are high. → This quality is acceptable.
The disSeat height is about an inch higher than OEM. I understand it's within the margin of error (laughs).

Since I changed to this, I have more chances to drive long distances for touring and I can drive more leisurely and comfortably (laugh).

Motorcycle seats are designed differently for each type of motorcycle, and are designed to allow the rider to easily take the riding position required for each type of motorcycle. Also, the large size depends on how the rider wants to drive and what kind of customization is desired.
If you are aware of the type of Motorcycle and how to drive it, you may enjoy driving one step more than you do now. View detail