Soooooo good!

Longer than NORMAL and a bit spaced out from the overall design?
But more than that, high speed driving is much easier.
The wind pressure on the Hadrill and Rider is reduced and they are less tired.
Helmet wind noise has been reduced.
In NORMAL, you have to get down quite a bit to get the Screen effect.
Kore is easy to feel that the chest and Helmet chin area is working.
This is a Recommendation for Riders who are struggling with wind pressure. View detail

Protective Power Outclassing!

I wanted a good looking and durable tank pad even if it is a little expensive … I have bought and used tank pads from all over the world, but I chose this one from Keiti of Made in Taiwan, which was the best. In a word "High quality" The pad is not very thick, but it prevents scratches and the adhesive strength is so high that it is hard to peel off or shift! It comes with a degreaser, so you don't need to prepare anything else to use it as it is! It is also good that it is resistant to ultraviolet rays and does not yellow even if it is a clear type! The printing is also beautifully done, and there are no smudged letters. I can't find anything bad to say about it, but if I had to, I would say that the price is a little high and that it is hard to fix if you don't warm it up properly…This is not limited to Tank Pad, but even in the middle of summer, it is a basic rule to use a dryer and warm it up thoroughly before applying the Pad. And do not stick it on a curved surface as much as possible! Finally, degrease the surface as much as possible! If you follow these three rules, I think it will not peel off. If you are in doubt, buy this product because it is a good Tank Pad! View detail

Small but dependable Keiti Tank Pad

[How is it used?
Without the Tank Pad, I couldn't help but notice scratches, so I stuck it on.

Was the one you received as per Image?
"Mini" That said, it is Large enough to be necessary, and has a good appearance, texture, and adhesive strength.
I think it is indeed Keiti.

Was the installation difficult?
The procedure is simple, as all you have to do is degrease and apply it, but it inevitably bends every time.
This time, I applied it very carefully, including using masking tape to center it out, but …… it still bent a little.

How was your experience with it?
I am happy with the adhesion, no problems at all, and it looks great.
"Mini" Therefore, it is one step smaller than Keiti's normal size, but the part that hits the tank is well covered, and I personally feel that this large size is the best for me.
Also, Material for color:It is tempting to choose Carbon Style, etc,
My Motorcycle (Color):(Gray×Black), and the glossy black suits it very well,
SolidColor without being too conspicuous:I really like the gray tank with the subtle black as the one point of accent.

[Included Parts:were they on?
Alcohol for degreasing is included.

[Was there anything that disappointed you?
The price is high, but the quality is worth it, so I have no complaints.

Point of installation
I have failed every time so far with Tank Pad pasting,
This time, we set the motorcycle upright on the maintenance stand and used masking tape to make a center out of the motorcycle.
…… but it still bent a bit.
If you are clumsy like me, you may want to ask Shop from the beginning. View detail

Not so much the performance, but the fact that the appearance hasn't changed much from OEM.

This is a HondaVFR800F 2022 MODEL. Previously used Puch Windscreen and replaced with this product.
Comparison with OEM
I like the VFR text in the bottom of the Windshield. It looks like it was changed for this purpose.
I have the impression that the wind protection effect is pleasantly improved.
The quality of the product is good, thick and firm.
The Design is personally Good, as the Center section appears to be slightly higher than the OEM, and with the VFR lettering, it looks like it could be called OEM.

Comparison with Puch
The wind protection effect at high speeds is clearly better for the pooch.
I prefer the look of ODAX. View detail

Windproofing of +15cm compared to OEM is not a feat

I don't see the length anywhere, so I'll be the first to write it down,
Ultra Long Screen with +15cm compared to OEM.
It's very long.
I just did a test run around town and the wind is not coming at all.

I personally like the Design with the widened end side,
Well, it's too long for my taste.

This is a serious Recommendation for those who want to swing for the Tourer!

The installation will take less than 2 hours if you are not familiar with it.
Since all of our predecessors have made it available on their blogs etc...,
Please refer to that.
Remove Mirror
Remove Under Cowl
Side cowl removal
Remove around Meter
Now you can finally attach and detach it. View detail