Reviews
Looks GOOD!
I am a Custom novice, but the installation was completed in about 15 minutes. You will need a hex wrench to remove the original bar end.
Looks better, but it takes some getting used to to fix Axel while driving. Low cosmetics.
View detail
What is the cospa?
It takes less than a minute. Just snap it on. The effect is good. However, the material and texture are not worth the price. I guess it's just an imported product. Well, it's an imported product, so I guess it can't be helped. View detail
Relief
I feel that the Swing arm pivot can be protected from dirt. View detail
It's a great product.
It's a great product.
It is very easy to assemble, and it is sturdy enough that there is no risk of it falling off and being lost while driving.
The design is much better than other products, so it goes very naturally with existing car body parts.
I was worried after ordering, but I am very satisfied. ----------------------------------------- ----------------- It's a great product. It is very easy to assemble, and it is sturdy enough that there is no fear of it falling off and being lost while driving. The design is much better than other products, so it goes very naturally with existing car body parts. I was worried after ordering, but I am very satisfied. Powered by Google Translator
View detail
RnineTPosition improvement
Slightly improve Position.
The only thing I was concerned about was the width of the handlebar, so I decided to replace the handlebar to make it even more effective.
View detail
Made by Wonderlich, a trusted manufacturer
Made by Wonderlich, which is reliable but expensive.
It would be nice to be able to easily extract power from the back of the Heller Socket.
View detail
It's made by Wonderlich, a company you can trust.
I haven't compared it to Chinese products, but I thought it was a sure bet since it is made by Wonderlich, a trusted name in the industry. View detail
Elbow pain improvement
With the OEM position, there was no room for elbow bending and I had elbow pain after 2 hours of riding. After installing this Handlebar Up kit, it became easier to ride and the pain disappeared.
The brake hose was fine, but the clutch hose was sticking when the handlebar was cut to the right. So, I removed the exterior and took the part of the hose that had room from the base of the clutch to the lever side and fixed it with a tie band. I also shifted the Clutch leverBracket installation slightly inward to make more room for the hose. There may be individual differences in the body of the vehicle.
The installation of the Kit itself is easy, but if the Hose is propped up, the work will be a little more difficult.
View detail
Fits: BMW R1200GS LC Water Cooling, BMW R1250GS Adventure, BMW R1250GS
?-? Cleaning is easy.?-?
The GS Headlight is a foldable, easy-to-clean headlight. View detail
high
KTC's Hexagon socket was half price, so I bought that.
Inch size, so it's not available in stores.
View detail
Fits: BMW RnineT, BMW F850GS, BMW F750GS, BMW RnineT /5, BMW RnineT Urban G/S, BMW RnineT Scrambler, BMW F900XR, BMW RnineT Pure, BMW F900R
It's solid.
It is quite large and sturdy. I bought it because the back of my hands cannot stand the cold when touring in winter. In fact, when I used it, I always had to use the Grip heater, but I was OK with the Grip heater off. Even if I did use it, it was only one step, but it was Large sturdy. View detail
thin
I was surprised that the actual product is so thin, I could never put a Smartphone Holder on it. Installation was easy and adjustment was simple. I am not sure of the effect, but it may have improved the rigidity of the handlebar. There were no problems at all when driving, and it felt easy to operate. View detail
Handlebar Cover is pampered
However, these are Handlebar Gloves, so they are safe.
I was able to install the GIVI Hand Guard ExtensionEH5108 with no problems.
View detail
I would have liked it to be a little thicker.
It was flimsy, but I was happy with the way it was installed and looked. View detail
Fits: HARLEY-DAVIDSON Pan America 1250, HARLEY-DAVIDSON Pan America 1250 Special
Alternatives to OEMCover
The OEM Battery plus terminal Cover was too stiff and came off too easily. So I put it on instead. It fits perfectly and looks good. However, the price is too high. View detail
LeftBolt portion comes out a little.
[How is it used?
Mounted on rear axle shaft
Was the one you received as per Image?
Street Image
Was the installation difficult?
Easy to use 10mm Socket and tighten from both SIDE.
How was your experience with it?
In case of a fall
[Included Parts:were they on?
Washeretc., can be installed with Included Parts:only
[Was there anything that disappointed you?
None; Left SideBolt portion will show some.
Other items that would be helpful
Availability of Instruction Manual
Yes, but translation (please enter here) is not supported.
View detail
Fits: BMW F850GS Adventure, BMW F850GS, BMW F750GS, BMW F900XR, BMW F900R
It fits.
It feels like an OEM product. Easy to install. I installed it to protect my Caliper in case of a fall. View detail
About Top caseBack
I am Large satisfied with the capacity without any problems. View detail
Fits: BMW S1000XR, BMW S1000RR, BMW S1000R, BMW C400X, BMW F750GS, BMW F850GS, BMW F850GS Adventure, BMW F900R, BMW F900XR, BMW R1200GS LC Adventure water-cooled, BMW R1200GS LC Liquid Cooling, BMW R1250GS, BMW R1250GS Adventure, BMW R1250R, BMW R1250RS
It was 2023 and F900XRExactly.
It was SizeExactly. It also works well for sunlight reflection. View detail
Fits: BMW C400GT, BMW C400X, BMW C600 Sport, BMW C650 Sport, BMW C650GT, BMW C650GT, BMW F700GS, BMW F700GS, BMW F750GS, BMW F800GS, BMW F800GS, BMW F800GS, BMW F800GS Adventure, BMW F800GT, BMW F800R, BMW F800R, BMW F800S, BMW F800ST, BMW F850GS, BMW F850GS Adventure
Used in S1000RR 2023.
We came across this product because we were told that if we took out the power supply poorly, an error would occur in the CAN BUSSystem.
It was easy to install as it simply slots into the USB power supply located under the Tandem seat.
Cowl removal is also easy.
Although the price is high, it is a good product because it can take out the power supply without the need for any modification.
View detail