Reviews
Installed on MY2021 StreetTripleRS
After wearing this, the wind has less effect on my upper body below the helmet, and I feel less tired even when driving at high speeds.
It looks a little silly, but it's functionality is important, so it's a TradeOff.
The only drawback is that the mounting points are bolted together with other plastic parts and the quantities are the same as other plastic parts.:Pair (for Left and Right) Since each part is supported in one place, the resin parts move together with the Screen base when there are bumps in the road, such as uneven surfaces. "Clatter." The sound is heard when the unit is installed. We are planning to stop the sound soon because it is an unavoidable part of the structure, but over 20,000 yen....
View detail
Fits: HONDA CB500R, HONDA CB500F, HONDA CB400R, HONDA CB500X, HONDA CB400X
No problems
I bought this fender for 400X because it does not have a rear inner fender. Since I have installed it since new, I can't compare with the condition without it, but I think it prevents dirt around the rear suspension (although it doesn't prevent it completely).
The Chain section does not EXACTLY match the Chain line, and when pressed with the finger, it touches the Chain, but it has never interfered with the Chain by shaking while running (15,000km).
There is a flat area on the front side of the Tire that collects fine sand and gravel, but this is only due to the structure.
Installation can be done easily by yourself, and even a novice mechanic should have no problem, but do not forget to check the tightness periodically as it is around the driving parts (although I never had it loose).
View detail
Rear Fender is good to have
After riding on a wet road, the hem of my Pants got dirty, so I put on the Rear Fender. It was easy to install, but when I loosened the ParaLever Bolt (Torque T50), I was worried that I might lick the Torque due to the tightening mechanism (the feeling in my hand was like I was going to lick it). (The feel of the bolt in my hand was like I was going to lick it.)
The bracket is solid for its cantilevered design, but the gap between the bracket and the fender can cause interference and chattering noise, so we recommend using padding before installation to prevent chattering.
As a result, the dirt countermeasure is effective.
View detail
Fits: MOTOGUZZI V7 850 SPECIAL, MOTOGUZZI V7 STONE 850
Expect mud splash reduction!
Not satisfied with one, he purchased two and connected them together in an adventure.
Maintenance was said to be difficult, so it was painted and installed.
The effect is unknown as it has not been driven yet.
View detail
Genuine Puig Touring Screen Clear for XT1200Z SUPER TENERE 2016
They are reasonably priced and the fitment is perfect with what I have read from reviews online for this screen to this model bike. Other items in my basket and this screen meant that the shipping was really good value because if you have a few smaller parts this cuts down on shipping individually. Some of the other parts were always going to be an issue in case they scratched the screen. Webike think of all this and pack your items accordingly. The screen was packed in a loveley thick bubble wrap and taped closed. The rest of the parts in my order were all padded and therefore, no damage could occur during transit. Webike even tape theentire box closed. EMS fast service is what I chose, the cost was so good and all my items were delviered in 5 days.The screen arrived with me in perfect condition and I am not surprised by the amount of bubble wrap that was surrounding it. The screen has a bit of flex which of course you need. This also helps when you have an aftermarket race front fairing and they very rarely are the exact same shape as the original so some movement is needed in a screen anyway. All the fixing holes are perfectly made, line up just fine. Not really much else to say about it, it's a clear screen. There are no sharp edges and all appears to be without any distortion to it either, crystal clear if you like. All together, I am very pleased with how it looks and how it all went together. Not a tough job for anyone. So, thank you Webike for the great services. View detail
Genuine Puig Dark Smoke Screen
A few customers have had these brand of screens. Personally, I have never tried them but as it goes they do seem a robust screen. Plus, a customer specifically requested this dark smoke version. They are reasonably priced and the fitment is perfect with what I have read from reviews online for this screen to this model bike. Other items in my basket and this screen meant that the shipping was really good value because if you have a few smaller parts this cuts down on shipping individually. Some of the other parts were always going to be an issue in case they scratched the screen. Webike think of all this and pack your items accordingly. The screen was packed in a loveley thick bubble wrap and taped closed. The rest of the parts in my order were all padded and therefore, no damage could occur during transit. Webike even tape the entire box closed. EMS fast service is what I chose, the cost was so good and all my items were delviered in 5 days.The screen arrived with me in perfect condition and I am not surprised by the amount of bubble wrap that was surrounding it. The screen has a bit of flex which of course you need. This also helps when you have an aftermarket front fairing and they very rarely are the exact same shape as the original so some movement is needed in a screen anyway. All the fixing holes are perfectly made, line up just fine. Not really much else to say about it, it's a dark smoke screen. There are no sharp edges and all appears to be without any distortion to it either, crystal clear if you like. All together, I am very pleased with how it looks and how it all went together. Not a tough job for anyone. So, thank you Webike for the great services. View detail
I think it works.
Purchased for a Large Screen.
Highway not verified
I drove down the road at 60~70km and felt that the wind hitting my stomach was considerably reduced. I plan to test it by driving to see how effective it will be as it will get colder from now on.
Looks a lot different and satisfying.
View detail
One point fashionable
It looks so much better.
Very nice for a little accent around the Handlebar.
View detail
Fits: KAWASAKI NINJA 1000 SX, KAWASAKI NINJA1000, KAWASAKI Z1000SX
Might be good.
I am 185 tall, so I felt a little small in the standard Screen.
Even at high speeds with temperatures of 13 degrees Celsius, it seemed to avoid the wind well and was easy to drive.
View detail
Installation could not be done
The two front holes were misaligned with the Bolt position on the Body side and could not be installed.
I asked Manufacturer to check and they said there was nothing wrong with the product itself.
I don't know why, but I decided to return it because I can't put it on.
Please be careful if you are buying the same type of car.
It is a shame because I liked both the transparency and the shape.
View detail
Fits: TRIUMPH TIGER 900 , TRIUMPH TIGER 900 GT PRO, TRIUMPH TIGER 900 GT, TRIUMPH TIGER 900 GT LOW
Genuine Puig Fender Extender for Triumph Tiger 900 GT 2020
The fender extender for the Triumph Tiger 900 GT 2020 model. Finding the orrect part was not hard as I used the tools Webike provide and cross referenced with Puig website. The price from Webike was really good and combined with the shipping I got with adding other parts to the order, this also turned out really good value. Shipping took 5 days and delivered by EMS. The parts were all intact and no damage during shipping. The fender extender itself is made of some slightly flexible material but it does feel very strong. The finsih is a nice smoothed off plastic sayin sheen. All the fisings were included so you don't have to worry about that. This fender extender is basically to help stopp all teh road debris flicking up and either damaging the bike or just keeping mud from teh engine compartment. Very pleased with this purchase after finally ordering. Thanks Webike, great job. View detail
As Image
After installing Navigation and changing the position, a suitable Screen was found. View detail
Regarding installation.
It is not Circuit use, so it is appearance oriented, but it has presence.
The only thing is that I have to use the screw holes in the Radiator carver for installation, but I can screw the Bracket in and use it as a bracket.
The Bracket is then screwed back on. When attaching a plastic cover on the surface, place a washer between the plastic cover and the surface to prevent cracking.
When I tried to work with it, the weight of the bracket caused one of them to come off. It took me about 30 minutes to get it to fit.
I don't have to worry about it. It's a foreign product, so it can't be helped. Also, since it is a screw hole of Radiator, it will be the first place to be hit when it falls over. In the worst case, the Radiator may be damaged.
It looks good, and I would buy it even if it were a little more expensive if it had the same features as the Frame Slider but closer in shape.
View detail
It is what it is
[How is it used?
Fitted due to risk of falling due to paralysis of the left hemisphere
Was the one you received as per Image?
As per Image
Was the installation difficult?
Anyone with tools can do it,
How was your experience with it?
I don't know because I haven't fallen over, but it is designed to absorb shock in two stages so that the impact is not heard by the Frame.
[Included Parts:were they on?
Sticker is attached.
[Was there anything that disappointed you?
In the event of a fall, the SliderBody is likely to collide with the Silicon rubber before the shock-absorbing Silicon rubber.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: BMW R1200GS, BMW R1200GS ADV, BMW R1200GS RAL, BMW R1200GS EXC, BMW R1250GS, BMW R1250GS ADV, BMW R1250GS HP
High wind resistance
The windproof effect is high, with a larger size than OEM.
The wood is thicker and more rigid than OEM, so the chattering noise that bothered me in OEM is gone.
The top edge is at eye level. [Color] Clear? [Color] Smoke colors provide good visibility, but be careful with dark colors.
View detail
Windproof effect is moderate
I used to wear Pooch's Long Screen, but the look didn't really stick and I had to remove it.
I still wanted a little wind protection, so I bought this Short Type.
The effect is certainly there, though not as much as Long.
There may be a difference in fatigue between the two.
And in terms of design, I think it is the best among the various external screens for Z1000, and I am glad I bought it.
Installation is easy, and the ScreenBody and Bracket are well made.
If there is anyone who is not sure about this product, I would like to recommend it to them.
View detail
If I had to choose one based on cosmetics, this would be it.
It is a Brand product (lol) and well made, but at an affordable price. I am very happy.
If you don't mind the round shape, I recommend this product. Side stands of today are cheaply made and have little ground contact surface, so it is a good product to have.
View detail
◎
I bought it because I wanted to increase comfort on the highway. Personally, I don't like Black or rainbow colored Screen because it looks childish. [Color] It was nice to have Clear. The installation requires a slight opening of the screen, which is disappointing since the accuracy is not very good for such an expensive screen. I thought that changing the screen would make the parenthesis worse, but I am satisfied with the new screen because it is expensive and looks good and cool. The comfort on the highway has improved considerably. View detail
Fits: YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 TRACER, YAMAHA MT-09 TRACER GT
Don't be a GunDam generation.
Dear Racer riders.
Have you ever felt a sense of rich volume in the upper part of the Front, but a sense of loneliness in the lower part of the Front?
Of course, I think that being Refreshing without anything is a design with a sense of lightness, but I chose this one to give an extravagant feeling to the underbelly of Small students who have been riding only Full Cowl to a certain extent.
The smoothness of the installation of such cowls is half of the difference between good and bad quality, but this pooch was easy to install due to the good dimensional accuracy of both the body and the bracket.
Now, if we look at it from a distance, we can see that it has a very good extravagant feel.
I don't feel any actual aerodynamic effect at all, but the increased volume on the underside of the car somehow created a sense of visual stability.
Items is not inexpensive, but it is a must-try for those who want a different feel for their partner.
View detail
Large I'm satisfied.
[How is it used?
What I like very much is that I don't think about removing it.
Was the one you received as per Image?
It was much better looking than Image. That's what Pooch is all about.
Was the installation difficult?
It is not difficult to install, but the procedure must be followed.
Also, the more knowledgeable may have more trouble.
1. the product arrives securely packaged (by the Manufacturer) in the same condition as the Image of the product on the Web.
2. I thought it would be possible to install it as is, but it was impossible because I could not get the tool in.
3. Remove the four blind lids in the photo, remove the screws, and remove the bracket from the screen.
4.The R and L are pressed on the bracket, so there is no chance of making a mistake after removing the bracket.
5.Remove the OEMBolt from the car body and install the bracket. Normally, the bracket is temporarily fastened and tightened after checking the balance, but as described in 2. However, the accuracy of the holes is very good and there is no rattling, so the bracket is large and strong even when tightened.
6.Bolt was included for fixing, but I used OEM as is.
7.Attach the screen. Since the bracket is tightened before the screen, it requires a little bit of force, but the screen is attached without any problem since the hole accuracy is good.
8.Place the blind lid on the head of the Screw that holds the Screen in place. This is the end of the process.
After installation, I was impressed with the precision and the attention to detail that goes above and beyond the Gold price, which I thought was not expensive at all.
How was your experience with it?
I just installed it and haven't run it yet, so I will update this page after running it.
[Included Parts:were they on?
It was attached.
[Was there anything that disappointed you?
So far, none at all. It's so good looking that you would think it was OEM.
View detail